Panasonic WH-MDF09C3E8, Руководство по обслуживанию

Страница: 73 / 129

73
5 Reset overload protector
Overload Protector serves the safety purpose to prevent the water over heating. When the Overload
Protector trip at high water temperature, take below steps to reset it.
o
Take out OLP Cover.
o
Use a test pen to push the centre button gently in order to reset the Overload protector.
o
Fix the OLP Cover to the original fixing condition.
6 External water filter (field supply)
Clean the external water filter in regularly basic.
o
External water filter is located inside the tube connector which is before water inlet connector of mono
bloc unit (indicated with “WATER IN”). (Refer to figure below)
o
Use spanner to detach the tube connector nut.
o
Take out the filter carefully so that not deforms it shape.
o
Use tap water only to wash the residue on the filter. If necessary, gently use soft brush only to clean the
hard dirt.
o
After clean, put it back to the original location and tighten the nut connection with torque wrench.