1. Introduction
3
1.3 General information
R
In the event of problems, you should contact your equipment supplier in the first instance.
R
The available products differ depending on your region. For more information, please consult your dealer.
R
In this document, the suffix of each model number (e.g., the "BX" in "VL-MWD273BX") is omitted unless
necessary. When the suffixes are used to describe models (e.g., "BX models"), the suffixes refer to all models in
the series.
R
Design and specifications are subject to change without notice.
R
The illustrations in the supplied document may vary slightly from the actual product.
House mode and Apartment mode
The main monitor can be configured to be used in two modes: House mode and Apartment mode.
R
House mode refers to when the main monitor is used as a stand-alone system and is not connected to a larger
system comprised of a VL-V900 lobby station. This document describes the operations for House mode.
R
Apartment mode refers to when the main monitor is used connected to a larger system comprised of a VL-V900
lobby station, such as in apartment complexes. Operations for Apartment mode are described in 6. VL-V900
basic operations (Page 13) of this document.
For further information about features and operations, visit our Web site and find the document:
https://panasonic.net/cns/pcc/support/intercom/v900
For Europe
Declaration of Conformity:
R
Panasonic Corporation declares that the radio equipment type (VL-MWD273BX) is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.ptc.panasonic.eu/doc
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Ecodesign information
Ecodesign information under EU Regulation (EC) No. 1275/2008 amended by (EU) Regulation No. 801/2013. From
1 January 2015.
Please visit here: www.ptc.panasonic.eu/erp
Click [Downloads]
a
Energy related products information (Public)
Power consumption in networked standby and guidance are mentioned in the Web site above.
This device is classified as a HiNA device (networked equipment with high network availability), according to
Ecodesign requirements.
Graphical symbols for use on equipment and their descriptions
1. Alternating current (A.C.) 2. Direct current (D.C.) 3. Protective earth 4. Protective bonding earth 5. Functional
earth 6. For indoor use only 7. Class
P
equipment (equipment in which protection against electric shock relies on
Double Insulation or Reinforced Insulation) 8. "ON" (power) 9. "OFF" (power) 10. Stand-by (power) 11. "ON"/"OFF"
(power; push-push) 12. Caution, risk of electric shock
1
2
3
4
5
6
7
8
9
10
11
12
273_iiqg.book Page 3 Tuesday, April 25, 2017 10:48 AM
