2. Important information
6
R
Do not put your ear(s) near the speaker, as
loud sounds emitted from the speaker may
cause hearing impairment.
R
Do not place coins or other metal objects in the
charger. Metal objects may become hot,
causing burns.
R
Do not place magnetic cards or other devices
that store data magnetically (such as credit
cards) near the charger. Failure to do so may
make the cards or devices unusable.
R
The speaker on the handset is magnetised and
may retain small metallic objects.
Sub monitor batteries
Preventing leakage, heat generation, rupture, or
accidents
R
We recommend using the Panasonic rechargeable
batteries, HHR-4MVE. USE ONLY rechargeable Ni-
MH batteries AAA (R03) size.
R
Do not mix old and new batteries.
R
Do not open or mutilate the batteries. Released
electrolyte from the batteries is corrosive and may
cause burns or injury to the eyes or skin. The
electrolyte is toxic and may be harmful if swallowed.
R
Charge the batteries provided or identified for use
with the product only, in accordance with the
instructions and limitations specified in this
document.
R
Do not heat batteries or dispose of batteries in a fire.
R
Do not touch the ends of batteries ( , ) with
metal objects.
R
Handle the batteries with care. Do not allow
conductive materials such as rings, bracelets or
keys to touch the batteries, otherwise a short circuit
may cause the batteries and/or the conductive
material to overheat and cause burns.
R
Only use the specified charger and AC adaptor to
charge the batteries. Failure to follow these
instructions may cause the batteries to swell or
explode.
2.2 Important safety instructions
When using this product, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock, or personal injury.
1.
Do not use this product near water. For example,
near a bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool,
etc.
2.
Use only the power supply unit, AC adaptor, AC
cable, and batteries indicated in this document.
Do not dispose of the battery(ies) in a fire. They may
explode. Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
2.3 For best performance
Location/avoiding noise (main monitor/sub
monitor)
The main monitor, sub monitor, and other compatible
Panasonic units use radio waves to communicate with
each other. (The product operates in the frequency
range of 1.88 GHz and 1.90 GHz with a peak
transmission power of 250 mW (max.).)
R
For maximum coverage (approx. 100 m) and noise-
free communications, install your main monitor:
– at a convenient, high, and central location with
no obstructions between the sub monitor and
main monitor in an indoor environment.
– away from electronic appliances such as TVs,
radios, personal computers, wireless devices, or
digital cordless phones.
– facing away from radio frequency transmitters,
such as external antennas of mobile phone
stations. (Avoid installing the main monitor near
a window.)
R
Coverage and voice quality depends on the local
environmental conditions.
R
Do not place the charger near TVs, speakers, or
other devices that emit electromagnetic waves.
Failure to do so may prevent the charger from
charging the product.
Environment (main monitor/sub monitor)
R
Keep the unit (main monitor/extension monitor and
sub monitor) away from electrical noise generating
devices, such as fluorescent lamps and motors.
R
The unit should not be exposed to direct sunlight.
R
The unit should be kept away from heat sources
such as radiators, cookers, etc. It should not be
placed in rooms where the temperature is less than
0
°
C or greater than 40
°
C. Damp basements should
also be avoided.
R
Do not install the product in locations that are
suspect to sudden changes in temperature. Failure
to do so may cause condensation to form on the
product causing malfunction.
R
Even when the main monitor and sub monitor are
used within 100 m of each other, obstructions can
cause weak signals, noise, interrupted
transmissions, distorted images and slow image
refresh rates. Obstructions can include:
– Metal doors or metal shutters.
– Heat insulation including aluminium foil.
– Concrete walls or walls made of galvanized iron
sheet.
– If the sub monitor is being used in a different
building, or a different part of the house, i.e. a
different floor to the where the main monitor has
been installed.
– Many walls.
– Double insulated glass windows.
273_iiqg.book Page 6 Tuesday, April 25, 2017 10:48 AM
