Basic C
onnec
tion
10
Quick Star
t Guide
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
There are some restrictions on placement for viewing 3D images. For details
(p. 31, 35)
Example 1
Example 2
Connecting dish or aerial
Connecting DVD Recorder / VCR and Player
TV only
TV, DVD Recorder / VCR and Player
RF IN
RF OUT
Rear of the TV
Terrestrial aerial
AC 220-240 V
50 / 60 Hz
Mains lead
RF cable
RF cable
DVD Recorder or
VCR
Player /
3D-compatible player
Fully wired
SCART cable
Fully wired
HDMI
compliant
cable
Aerial input
terminal
AV
HDMI
•
To ensure your satellite dish is correctly installed, please
consult a dish installer.
•
The freesat channel uses Astra 2 at 28.2° East, and Eurobird
1 at 28.5° East satellites. To ensure your satellite dish is
correctly installed please consult your freesat registered
dealer.
■
How to use the clamper
bundling the mains lead
To loosen :
knob
Keep pushing the knob
Bundle the cables
hooks
Set the tip in the
hooks
To remove from the TV:
Keep pushing both
side snaps
snaps
•
Do not bundle the Satellite cable, RF cable and mains lead
together (could cause distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s
assembly manual to fix cables.
•
For digital terrestrial and
analogue broadcasts
Rear of the TV
Terrestrial aerial
AC 220-240 V
50 / 60 Hz
Mains lead
RF cable
•
For digital satellite broadcasts
Satellite dish
Satellite cable
Aerial input terminal
Note
•
To watch 3D contents
(p. 31)
•
Connect to the TV’s AV1 for a DVD Recorder / VCR supporting Q-Link (p. 98).
•
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI
cable (p. 104).
•
Q-Link and VIERA Link connection
(p. 96, 97)
•
Please also read the manual of the equipment being connected.
•
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise,
distortion of image / sound may occur or operation of other equipment may be interfered.