Panasonic UF-8300, Руководство по обслуживанию

Страница: 176 / 261

176
UF-7300/7200
UF-8300/8200
Function Parameter List (Sample)
Note:
1. The contents of the Function Parameter List may vary depending on the country’s regulations.
2. “ * ” mark will be shown on the left side of number when setting was changed from default.
************* -FUNCTION PARAMETER- ************* DATE MMM-dd-yyyy ***** TIME 12:07 ***P.01
-Panafax PCC -
Note: The power must be reset for the new parameter settings to take effect.
******** UF-xxxx ************************** -PCC Manual - ******* - 123- ***********
000 MON/TEL DIAL:[Monitor] Monitor 050 RING DET MODE:[Normal] Normal
001 ALARM STATUS:[Timer] Timer 051 ----------
002 STOP COMM. JRNL:[On] On 052 PULSE RATE:[10pps] 10pps
003 CONTINUOUS POLLING:[Off] Off 053 ----------
004 NUMERIC ID SET:[On] On 054 ----------
005 ---------- 055 BUSY TONE CHECK:[On] On
006 ID DISPLAY:[Name] Name 056 DIAL TONE CHECK:[On] On
007 ---------- 057 ----------
008 MONITOR:[Off] Off 058 COMM.JRNL +IMAGE:[On] On
009 DC LOOP:[Off] Off 059 ----------
010 TX LEVEL:[-11dBm] -11dBm 060 VERSION: UF-xxxx xxxxxxxxxx
011 RX LEVEL:[-43dBm] -43dBm 061 TX/RX/PRT/CPY: 000080/000168/000003/000000
012 DTMF LEVEL:[-5DBM] -5dBm 062 PRINT COUNTER:[Off] Off
013 G3 RX EQL:[0dB] 0dB 063 ----------
014 G3 TX EQL:[0dB] 0dB 064 ----------
015 --------- 065 ----------
016 --------- 066 ----------
017 TX START:[14400bps] 14400bps 067 ----------
018 RX START:[14400bps] 14400bps 068 NYSE FAX FORWARD:[Off] Off
019 ITU-T V.34:[On] On 069 NYSE LOCAL PRINT:[Inc] Inc
020 ITU-T ECM:[On] On 070 LINE ERROR:[128] 128
021 EP TONE:[Off] Off 071 TOTAL ERROR:[10] 10
022 SIG. INTERVAL:[500ms] 500ms 072 CONTI. ERROR:[Off] Off
023 TCF CHECK:[Normal] Normal 073 ERROR DETECT:[Rate] Rate
024 CED FREQ.:[2100Hz] 2100Hz 074 RTN RECEIVE:[Discon] Discon
025 COMM. START-UP:[1'st] 1'st 075 CODING:[JBIG] JBIG
026 NON-STANDARD:[On] On 076 BATCH TX:[On] On
027 SHORT PROTOCOL B:[On] On 077 RX JAM LENGTH:[2 m] 2 m
028 SHORT PROTOCOL D:[On] On 078 ----------
029 REMOTE DIAG.:[On] On 079 ----------
030 CED & 300bps:[75ms] 75ms 080 DOC TOP FEED:[0] 0
031 RTC=EQL X 12:[Off] Off 081 DOC END FEED:[0] 0
032 V34TX START:[33600bps] 33600bps 082 JAM LENGTH:[1 m] 1 m
033 V34RX START:[33600bps] 33600bps 083 ----------
034 V34 TX SR:[3429sr] 3429sr 084 LINE AS NOPAPER:[Ring] Ring
035 V34 RX SR:[3429sr] 3429sr 085 ----------
036 --------- 086 ----------
037 PROTOCOL DISPLAY:[Off] Off 087 DARKER LEVEL:[2] 2
038 --------- 088 NORMAL LEVEL:[8] 8
039 FLASH TIME:[500ms] 500ms 089 LIGHTER LEVEL:[14] 14
040 --------- 090 ----------
041 PAUSE TIME:[3sec] 3sec 091 ----------
042 --------- 092 SMOOTHING:[On] On
043 REDIAL INTERVAL:[3min] 3min 093 ----------
044 REDIAL COUNT:[5] 5 094 ----------
045 RING DET. COUNT:[2] 2 095 REDUCTION RATIO:[100%] 100%
046 ON-HOOK TIME:[5sec] 5sec 096 ----------
047 RESPONSE WAIT:[55sec] 55sec 097 ----------
048 --------- 098 ----------
049 --------- 099 ----------