Panasonic UF-8300, Руководство по обслуживанию

Страница: 172 / 261

172
UF-7300/7200
UF-8300/8200
068 NYSE FAX
FORWARD
(USA and
Canada Only)
1 = Off
2 = On Selects whether the machine will forward the
incoming and outgoing faxes to a specified station.
Note:
Once this parameter is activated, Fax Forwarding
via Fax Parameter 054 is automatically disabled,
an Access Code of "0000" is automatically
assigned and Fax Parameter 038 has a new setting
added called "NYSE".
069 NYSE LOCAL
PRINT
(USA and
Canada Only)
1 = Inc
2 = On (Always) Selects the printing condition for the incoming faxes
after FAX Forwarding.
INC. : Prints only if FAX Forwarding fails.
ON : Always prints.
070 LINE ERROR 128 lines
256 lines
512 lines
1024 line
2048 lines
Off (will not disconnect
line) 1. Selects the line disconnect condition during
reception. If the number of line errors exceed this
setting, the unit will disconnect the line.
Press the
“ ” , “ ” keys to select the symbol
rate.
2. Selects the transmit condition of RTP/PIP or RTN/
PIN.
(Available if No.73 Error Detect is set to "LINES")
(
See Note 1 )
071 TOTAL ERROR 1 = 5%
2 = 10%
3 = 15%
4 = 20% Selects the transmit condition of RTP/PIP or RTN/
PIN.
(Available if No.73 Error Detect is set to "RATE".)
(
See Note 2 )
072 CONTI. ERROR 1 = Off (unlimited)
2 = 3 lines/STD
3 = 6 lines/STD
4 = 12 lines/STD Selects the continuous total error criteria of Off/3/6 or
12 lines in Standard mode. If continuous total error
exceeds this setting, the unit will transmit RTN/PIN.
(Available if No.73 Error Detect is set to "RATE".)
073 ERROR DETECT 1 = Lines
2 = Rate
Selects the error detect condition Lines/Rate.
074 RTN RECEIVE 1 = Disconnect
2 = Continue Selects whether to disconnect the phone line or
continue when "RTN" is received.
075 CODING 1 = MH (MH only)
2 = MR (MH or MR)
3 = MMR (MH, MR or
MMR)
4 = JBIG Selects the coding scheme.
076 BATCH TX 1 = Off
2 = On Selects whether the batch transmission is available.
077 RX JAM LENGTH 1 = Off (unlimited)
2 = 2 m
Selects the maximum length of a received document
that can be printed.
078~
079
Not Used
080 DOC TOP FEED -99
~
+99
Adjusts the distance between the scanning sensor
ON position and the scanning start position.
081 DOC END FEED -90
~
+127
Adjusts the distance between the scanning sensor
OFF position and the scanning end position.
082 JAM LENGTH 1 = 1 m
2 = 2 m Selects the maximum length of the original that can
be scanned.
083 Not Used
Function Parameter Table
No. Parameter Selections Function