Panasonic U-100PEY1E5, Технические данные и руководство по обслуживанию

Страница: 244 / 739

1-234
1
Single -Type
1-1. Unit Specifi cations
PEY1
7. Ducted Type S-125PN1E5 / U-125PEY1E5
INDOOR MODEL S-125PN1E5
PANEL MODEL -
OUTDOOR MODEL U-125PEY1E5
Branch pipe MODEL -
PERFORMANCE TEST CONDITION ISO5151 / EN14511 / EN14825
POWER SUPPLY
ø, Hz 1ø 50Hz 1ø 50Hz
V 220 230 240 220 230 240 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 12.5 12.5 12.5 3.8 13.5
BTU/h 42700 42700 42700 13000 48100
CURRENT A 1.74 1.67 1.61 20.1 19.3 18.7 - -
INPUT POWER
W 225 225 225 4.220k 4.220k 4.220k - -
TOTAL W - 4.445k 4.445k 4.445k 950 5.200k
ANNUAL CONSUMPTION TOTAL W 4 - - 2222.5k - - -
EER/EER CLASS TOTAL(W/W) 5/("A"~"G") - - - 2.81 2.81 / C 2.81 4.00 2.60
Erp
6
Pdsign kW - - - - - -
SEER (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 95 95 94 - -
NOISE INDOOR
(H/M/L)
dB-A 45/43/38 -
Power Level dB 66/64/59 -
NOISE OUTDOOR
(H/L)
dB-A 56/-
Power Level dB 73/-
H
E
A
T
I
N
G
CAPACITY
kW 12.5 12.5 12.5 3.4 15.0
BTU/h 42700 42700 42700 11600 51200
CURRENT A 1.74 1.67 1.61 16.5 15.8 15.2 - -
INPUT POWER
W 225 225 225 3.440k 3.440k 3.440k - -
TOTAL W - 3.665k 3.665k 3.665k 780 4.600k
COP/COP CLASS TOTAL(W/W) 5/("A"~"G") - - - 3.41 3.41 / B 3.41 4.36 3.26
Erp
6
Pdsign kW - - - - - -
Tbivalen °C - - - - - -
SCOP (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 95 95 94 - -
NOISE INDOOR
(H/M/L)
dB-A 45/43/38 - ⁄ ⁄
Power Level dB 66/64/59 -
NOISE OUTDOOR
(H/L)
dB-A - 56/- ⁄ ⁄
Power Level dB - 73/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP -
MAX CURRENT(A)/MAX INPUT POWER(W) 2.36/300 2.30/300 2.24/300 29.0/6.000k 29.0/6.300k 29.0/6.600k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 20.1/3.0k 19.3/3.0k 18.7/3.0k ⁄
NETWORK IMPEDANCE ( Ω MAX.) - -
FM OUTPUT (W) 200 90 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 7.9 (16.6) -
External static pressure Pa 50 (MIN10 ~ MAX80)
I/D AIR
FLOW
COOL m 3 /min (ft 3 /min) 38 (1342)
HEAT m
3
/min (ft
3
/min) 38 (1342)
O/D AIR
FLOW
COOL m 3
/min (ft
3
/min) 80 (2825)
HEAT m 3 /min (ft 3 /min) 73 (2578)
REFRIGERANT TYPE, AMOUNT g (oz) R410A 3.20k (112.9) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 250 9-27/32 996 (39-7/32) /
WIDTH : W mm(inch) 1200 (+100) 47-1/4 (+3-15/16) 940 (37-1/32) /
DEPTH : D mm(inch) 650 25-19/32 340 (13-13/32) /
P
A
C D
I
M
HEIGHT : H mm 338 1136 /
WIDTH : W mm 1402 1055 /
DEPTH : D mm 761 485 /
MASS
(NET) k
g
(lb) 41 (91) 85 (188) /
(GROSS) k g (lb) 48 (106) 93 (205) /
LAYERS LIMIT (actually) 6 (7) 2 (3)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -10°C ~ 43°C
Heat O.D(DBT) 16°C ~ 30°C -15°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 50 (16.4 ~ 164.0) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT
g
/m (oz/ft) 50 (537.6)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 30 (98.4)
*1 : In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 : If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3 : Network Impedance shall be applicable for EUROPE and CHINA models.
*4 : The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5 : EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6 : SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830211-07̲PAC-i.indb 234 SM830211-07̲PAC-i.indb 234 2013/09/17 22:47:35 2013/09/17 22:47:35