44
Using WebBrowser
(cont.)
You can make the network settings on the unit when connecting without computer administrator rights, when connecting through
an access point (infrastructure mode), or when making security settings. (See page 51, Other Connection Methods)
Network Settings Screen
Network Number Setting Screen
This screen is used to select the network number. The network number determines the effective area of the network.
Access is not possible if the value set on the application is other than the network number set for the unit.
In addition, since the security levels differ for each, select the optimum network for the environment being used.
1: Initial settings (simple connection mode).
2 to 4: The WEP setting. Key information is a fixed value.
USER1 to USER3: Allows detailed network and security settings. (Also used for settings during infrastructure mode.)
3
Click [Network Settings] on the menu.
1
Click NEXT.
2
After selecting settings, click OK.
If the network number is 1 to 4, the screen on the right will appear and settings are complete.
To use USER1 to USER3, proceed to Step 4 and make detailed settings (SET UP).
