48
Q-Link
Preparations
Connect the DVD Recorder / VCR with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK”
Q-Link connection
p. 46
Use fully wired SCART cable.
Set up the DVD Recorder / VCR. Read the manual of the recorder.
Q-Link terminal setup in the Setup Menu
“Q-Link” (p. 28), “AV1 / AV2 out” (p. 28)
Download preset - channel, language, country / region settings
“Preset download” (see below)
Features available
Preset download
Channel, language, country / region settings can be downloaded to the recorder.
DVB-C channel setting cannot be downloaded.
To download settings
“Download” (p. 28) or “Auto Setup” (p. 31) or “Auto Setup” - when first using the TV
(p. 12)
Direct TV Recording -
What you see is What you record
Recording the current programme in DVD Recorder / VCR immediately.
EXIT
DIRECT TV REC
G
U
ID
E
DIRECT TV REC
Available conditions:
Current mode
Using tuner
How to record
Analogue
TV
TV monitor out
Recorder
Recorder’s tuner
DVB
TV
TV monitor out
AV
( watching recorder’s tuner)
Recorder
Recorder’s tuner
AV
( watching recorder’s external input)
–
Recorder’s
external input
AV
( watching TV’s external input)
–
TV monitor out
When Direct TV Recording is performed, the recorder is automatically
turned on if it is in Standby mode.
Changing channel or turning off the TV is available while the recorder is
recording from its own tuner.
Changing channel is not available while the recorder is recording from
the TV tuner.
To stop recording
Unlock the tuner
G
U
ID
E
Unlock
Continue
Tuner Locked
Please stop recording to operate
EXIT
Power on link and Easy playback
Set Power on Link “On” in the Setup Menu to use this function
“Power on Link” (p. 28)
When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment
are activated, the TV is turned on and input mode is switched automatically so that you can view the
content. (Only when the TV is in Standby mode.)
Power off link
Set Power off Link “On” in the Setup Menu to use this function
“Power off Link” (p. 28)
When TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the
videocassette or disc is not active.)
This function will work even if the TV enters standby mode automatically by Off Timer function or auto power
standby function.
“DATA LOGIC” (a trademark of Metz Corporation)
•
“Easy Link” (a trademark of Philips Corporation)
•
“Megalogic” (a trademark of Grundig Corporation)
•
“SMARTLINK” (a trademark of Sony Corporation)
•
Note
Some recorders are not applicable. Read the manual of the recorder.
Link Functions
(
Q-Link
VIERA Link
)