42
Operation
U
seful Infor
m
ati
on
Use of Peripheral Devices/Internal Hard Disk
Pay strict attention to the following points to avoid damage to the computer, peripheral
devices, cables, etc.
Also, in addition to following this manual and the onscreen Reference Manual, carefully
read the instruction manuals for the peripheral devices being used.
z
Use only peripheral devices that conform to the computer’s specifications.
z
Connect the devices properly, paying close attention to the condition and position of
the connectors.
z
If a connection cannot be made easily, do not apply undue force; check once more
to confirm the condition and position of the connector (alignment of pins, etc.).
z
If the connector has holding screws, fasten the screws firmly.
z
Do not carry the computer with cables attached, and do not pull on the cables force-
fully.
To Protect Data
Keep the following.
z
Do not expose your computer to shock.
Use care when handling your computer, shock may damage your hard disk or make
your software applications and data unusable.
z
Do not power off your computer while software applications are running or
hard disk drive indicator
is on.
Properly shut Windows down from the [start] menu to avoid problems. (
z
Do not place the Computer close to objects that emit electromagnetic waves
(magnets, electromagnetic bracelets, etc.).
The data saved on the hard disk may be erased.
z
Important data saved on the hard disk should be saved regularly (e.g., in case
of failures, unexpected data updates, erasure, etc.)
Regular backups are recommended as a means of minimizing damages in the
event of trouble.
z
Use the security function for all important data.
(
Î
“Chapter 2: Security Measures” and “Chapter 4: SD Memory Card Security
Function” in onscreen Reference Manual)
When Changing Hard Disk Partitions
z
During reinstallation, you can divide the hard disk space into two partitions by exe-
cuting: [Make two partitions, for the operating system and data, and reinstall Win-
dows to the operating system partition].
Confirm the minimum partition size required for the OS by checking the screen dur-
ing the reinstallation.
If you want to create three or more partitions, after creating an OS partition and a
data partition during the reinstallation, start up Windows, erase the second partition
once using [Disk Management], and then create the partitions in the open space.
When Using Peripheral Devices
Internal Hard Disk
