background image

4

Safety Precautions

WARNING 

 Setup

This Plasma Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

Always be sure to ask a quali

¿

 ed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard 
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from 
being played with by young children, creating the potential risk of suffocation.

Do not place the Plasma Display on sloped or unstable surfaces, and ensure that the Plasma Display does 
not hang over the edge of the base.

• The Plasma Display may fall off or tip over.

Do not place any objects on top of the Plasma Display.

•  If water is spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result 

in 

¿

 re or electric shock. If any foreign objects get inside the Plasma Display, please consult your local Panasonic 

dealer.

Transport only in upright position!

• Transporting the unit with its display panel facing upright or downward may cause damage to the internal 

circuitry.

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table 
cloths and curtains.

For suf

¿

 cient ventilation;

If using the pedestal (optional accessory), leave a space of 10 cm or more at the top, left and right, and 7 cm 
or more at the rear, and also keep the space between the bottom of the display and the 

À

 oor surface.

If using some other setting-up method, follow the manual of it. (If there is no speci

¿

 c indication of installation 

dimension in the installation manual, leave a space of 10 cm or more at the top, bottom, left and right, and 7 cm 
or more at the rear.)

• Speakers ........................................................................  TY-SP65P11WK
• Pedestal .........................................................................  TY-ST65VX300
• Wall-hanging bracket (angled) .......................................  TY-WK65PR20
• BNC Dual Video Terminal Board .................................... TY-FB9BD
• HD-SDI Terminal Board .................................................. TY-FB9HD
• HD-SDI Terminal Board with audio ................................ TY-FB10HD
• Dual Link HD-SDI Terminal Board .................................. TY-FB11DHD
• Dual HD-SDI Terminal Board for 3D .............................. TY-FB30DHD3D
• Dual HDMI Terminal Board ............................................ TY-FB10HMD
• DVI-D Terminal Board .................................................... TY-FB11DD
• Dual DVI-D Terminal Board for 3D ................................. TY-FB30DD3D
• AV Terminal Box ............................................................. TY-TB10AV
• 3D IR TRANSMITTER ................................................... TY-3D30TRW

Содержание TH-65VX300ER











































































Отзывы: