HDMI1
HDMI2
PC
INPUT
SLOT INPUT
COMPONENT
INPUT
MENU
ENTER/
Ŷ
MENU
ENTER/
Ŷ
INPUT
18
Selecting the input signal
Press to select the input signal to be played back from the equipment
which has been connected to the Plasma Display.
HDMI input terminals in HDMI 1 to HDMI 2.
PC input terminal in PC IN.
* “COMPONENT” may be displayed as “RGB” depending on the
setting of “Component/RGB-in select”. (see page 41)
Input terminal in Terminal Board
When a dual input Terminal Board is installed, “SLOT INPUT A” and “SLOT INPUT B”
are displayed.
When an optional Terminal Board is installed:
Using dedicated buttons for input selection
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Select to match the signals from the source connected to the component/RGB
input terminals. (see page 41)
• Image retention (image lag) may occur on the plasma display panel when a still
picture is kept on the panel for an extended period. The function that darkens
the screen slightly is activated to prevent image retention (see page 69), but this
function is not the perfect solution to image retention.
Press to select HDMI signal terminals in HDMI 1 or HDMI 2.
Press to select component or RGB signal terminal in COMPONENT/RGB IN.
Press to select PC signal terminal in PC IN.
Press to select Input terminal in Terminal Board.
For dual input Terminal Board, you can select either input terminal
using A or B button.
HDMI1
HDMI2
PC
INPUT
COMPONENT
Component or RGB input terminal in COMPONENT/RGB IN.*
