Panasonic SL-VVMES2, Инструкция по эксплуатации, Страница: 4 / 22

3
4. Function Description
SW10
SW8
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW9
SW11
7.45
20
255.8 261.8
66.7
6) Transmission
indicator for port
1 (Green)
5) System setting
button for port 1
7) BUSY indicator
for port 1 (Orange)
8) Error indicator
for port 1 (Red)
6) Transmission
indicator for port
2 (Green)
10) Status / ID
setting switches
2) I/O first address
setting switches
4) I/O setting switches
for port 1
3) Transmission mode
setting switches for port 1
I/O control points
setting switches for port 1
4) I/O setting switches
for port 2
3) Transmission mode
setting switches for port 2
I/O control points
setting switches for port 2
M2.5 (length 9) 9) Interruption level setting switches
1) S-LINK V terminal
block connector for
port 2
1) S-LINK V terminal
block connector for
port 1
5) System setting
button for port 2
7) BUSY indicator
for port 2 (Orange)
8) Error indicator
for port 2 (Red)
(16.5)
186.1
169.6
(Unit: mm)
1) S-LINK V terminal block connector
Connect main line and power supply of S-LINK V system. Port 1 and port 2 is independent re-
spectively.
7
6
5
4
3
2
1
G
D
0
24
0
24
FG
IN
View from wiring side
No. Terminal Remarks
7 G Black
6 D White
5 0V Blue
4 +24V Brown
3 0V
External power supply input
2 +24V
1 F.G. Frame ground
Tightening torque of the terminal screws: 0.5 to 0.6 N·m
Terminal block connector:
$*;<=>?@Q*;Q>Z[\]! ^\$ _ `^
Notes: 1) Three ways of wiring is possible: "port 1 only," "port 2 only," and "port 1 and 2." Wiring to unused
port is not necessary.
2) Power is supplied from the respective power source or common power source to two ports. In case
common power sourse is used, wire to the respective external power input.