Panasonic SG-P Series, Инструкция по эксплуатации

Страница: 60 / 76

7.1 Specifications
7.1.1 Model No.
(Note 1) Provided only on the SG-P□□-M standard unit.
7.1.2 Individual Specifications
Model
Standard PNP output Standard NPN output Sub
SG-P□□-M-P SG-P□□-M-N SG-P□□-S
Operating distance Front / Side Sao (OFF→ON): 5 mm, Sar (ON→OFF): 15 mm
Power supply voltage 24V DC +10%/ -20% ripple (P-P) of 10% or less
Current consumption 30 mA or less 20 mA or less
Control output (OSSD1 / 2)
(Note 2)
PNP transistor
● Open collector 2
outputs
NPN transistor
● Open collector 2
outputs
-
Maximum source current:
100 mA Maximum sink current:
100 mA
-
● Applied voltage: Same as the power supply
voltage
(PNP:between control output and 0V,
NPN:between control output and +V)
● Residual voltage: 2V or less (source current and
sink current: 100 mA)
(excluding voltage drop due to cable)
● Leakage current: 0.2 mA or less (including power
OFF state)
● Maximum load capacity: 0.47 μF
● Load wiring resistance: 3 Ω or less
-
Operation mode (output
operation)
When the actuator is detected (safe state): ON
When the actuator is not detected (unsafe state or
lockout state): OFF
When the switch body (sub) does not detect actuator
(series connection): OFF
-
7.1 Specifications
7-2 WUME-SGPUM-2