Panasonic SG-P Series, Инструкция по эксплуатации

Страница: 25 / 76

Actuator
Name Function
1
Switch body detection
surface When the actuator is brought near to the switch body, the switch body detects
the actuator.
2 Mounting hole
Use M4 screws, flat washers, and spring washers to mount the switch body on
a machine unit or on a guard.
■
Visible type
Switch body
Name Function
1 Indicator
Lights green “ ”
When the actuator is detected
Lights red “ ”
When the actuator is not detected
Blinks red “ ”
● Lockout state, error occurrence
(Note 1)
● When the teaching sequecnce was incorrect (only
when using high-code models)
(Note 1)
Blinks green “ ”
● When multiple units are connected, the actuator is
not detected by other switch bodies (standard unit
or sub unit).
● When multiple units are connected, an error has
occurred in other switch bodies (standard unit or
sub unit).
Lights yellow “ ”
After the power supply is turned ON, during self-
diagnosis
2.3 Parts of the Device
WUME-SGPUM-2 2-9