74
LSQT1438
75
LSQT1438
With a
computer
4
Installing VideoCam Suite
VideoCam Suite only runs on Windows computers.
Install and uninstall the software with administrator authorization.
●
●
Before installing the software, check your operating environment (P.72) and
close any other software applications which are running.
Do not perform other computer operations while installing the software.
Do not connect this unit to the computer until installation is complete.
Install VideoCam Suite only from the supplied CD-ROM.
Insert the supplied CD-ROM into your computer.
The installation program begins automatically and the message appears on
the screen.
Click [Next].
Select the folder where the application will be installed and click [Next].
Decide whether to create a shortcut.
Select the country or region where you live and
click [Next].
Check the message prompting you to confirm
and click [YES].
If you cannot select your country or region, click
[PAL Area].
●
●
Click [Install] and follow the directions appearing
on the screen to complete the installation.
If the installation is interrupted halfway through,
the software may not operate properly.
If using Windows 2000, Microsoft DirectX 9.0c
must be installed in order to operate VideoCam
Suite 2.0. Depending on the operating
environment, you may be required to install
DirectX 9.0c. If so, follow the instruction on the
screen and install it. If you install the software
on a PC that is not compatible with DirectX 9.0c,
the PC may not work properly. If you are unsure
whether or not your PC is compatible, contact
the PC manufacturer.
●
●
●
●
●
●
[Readme] is displayed when the installation is completed. Be sure to check
the contents.
Click [Finish].
Select “Yes, I want to restart my computer now.” to automatically restart the
computer and complete the installation.
Eject the CD-ROM from the computer.
After the installation is finished, the icon [
] is displayed in the task tray.
If the Setup Menu does not start up automatically
Double-click the CD-ROM icon [
] containing the CD-ROM drive in
[Computer (My Computer)].
Uninstalling the software
For Windows Vista
From the Start menu, select [Control Panel]
→
[Programs]
→
[Uninstall a Program].
For Windows 2000 or XP
Click [Start]
→
([Settings]
→
) [Add or Remove
Programs (Applications)] in the [Control Panel].
●
●
Select [VideoCam Suite 2.0] and click [Uninstall
(Remove)] or [Uninstall/Remove].
Continue to follow the on-screen messages to
uninstall it.
After uninstalling the software, restart the
computer.
Содержание SDR-S15
Страница 54: ...106 LSQT1438 107 LSQT1438 ...