VQT2R71
7
Before use
Control guide
Speaker (with built-in ampli
fi
er)
AC IN
㨪
TEST
ID
Pole
(mid-high part)
Base
(woofer part)
AC input terminal
(
➜
page 14)
TEST
terminal
[WIRELESS LINK] indicator
(
➜
page 15)
When the unit is connected to the
AC mains supply, this indicator
lights red in standby mode and
lights green when the unit is turned
on.
ID switch
Unit on/off button (
k
I
l
^
)
(
➜
page 15)
Use this button to turn the unit on and off.
l
(off): The unit is in standby mode.
k
(on): The unit is on.
The unit is still using a small amount of
power in the standby. Standby uses less
power.
Front view
Side view
TEST terminal: This is used to check the product operation status. Only used in factory. Do not insert a foreign object.
ID switch: This is used to check the product operation status and not used regularly.
Note
Remote control
Standby/on button
(
➜
page 18)
Input selector
(
➜
pages 18, 26)
For adjusting speaker output
(
➜
pages 22, 23)
Test signal output
(
➜
pages 16, 23)
For adjusting the volume
(
➜
page 18)
For using “WHISPER-MODE SURROUND”
(
➜
page 22)
Muting
(
➜
page 22)
For returning to the previous menu
(
➜
pages 11, 17, 22 to 26)
For using “GAME”
(
➜
page 22)
For entering setup mode
(
➜
pages 11, 17, 22 to 26)
For adjusting/activating settings
(
➜
pages 11, 17, 22 to 26)
For remote control buttons used for speaker
setting, see pages 15 to 17.
Note
For selecting or cancelling
Dolby Virtual Speaker,
Dolby Pro Logic and SFC mode
(
➜
page 19)
