VQT2R71
6
Before use
Control guide
Rear view
AC input terminal
(
➜
page 14)
Subwoofer output
terminal
(
➜
page 13)
Digital audio input terminal
(
➜
pages 10 to 12, 21)
HDMI terminal
(
➜
pages 10, 11, 13, 21)
Audio input terminal
(
➜
pages 10 to 13)
Audio output terminal
(
➜
below)
Main unit (Control box)
Control guide
Front view
Display
PCM
W
DIGITAL DTS
PL
SFC
MIX
VS
DIGITAL INPUT
Digital surround signal/Sound
fi
eld
(
➜
below, page 19)
When input signal is digital
When PCM signal is being input
or the input signal setting is
fi
xed
to PCM
(
➜
page 26)
General display
When the input signal setting is
fi
xed to DTS
(
➜
page 26)
Wireless Link display
(Displayed when wireless speakers are properly operating.)
(
➜
page 16)
When the sound
fi
eld effect is off by
pressing [
–
SETUP, OFF]
(
➜
page 19)
or
when using headphones
(
➜
page 27)
Standby/on switch (
8
)
(
➜
pages 15, 18)
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
For adjusting volume
(
➜
page 18)
[INPUT SELECTOR]
switch
(
➜
page 18)
For connecting
headphones
(
➜
page 27)
DIGITAL : Dolby Digital sources
DTS :
DTS
sources
VS
: When Dolby Virtual Speaker is working
SFC
: When SFC mode is being used
PL : When Dolby Pro Logic decoder is being
used (When using Dolby Virtual Speaker
for 2-channel stereo source)
• The audio output terminals can be used when you do not use the wireless function and play back on other speakers via an
external amplifier. Use commercially available monaural audio cables (monaural mini plug/pin plug) to connect to audio input
terminals of an external amplifier channel by channel.
