Panasonic SCZT2 - HOME THEATER AUDO SYSTEM, Руководство по эксплуатации

Страница: 11 / 32

VQT2R71
11
• Turn off all equipment before making any connections.
• To connect equipment, refer to the appropriate operating
instructions.
Home Theater connections
Connection
Connecting STB etc.
Setting for automatically switching the input source to STB
When you make the above connection and you use Panasonic TV (VIERA), you can automatically switch this system’s input by
switching the input source of TV (VIERA) to STB in the following procedure.
Preparation: Make sure that this system has been turned on. (
➜ page 18)
1. Switch the input source of TV (VIERA) with the above connection
and show STB pictures.
2. Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. (
➜
page 23)
3. Press [
w
][
q
] to select “ STB AUDIO ” and press [OK].
4. Press [
e
][
r
] to select “ SET ” and press [OK].
SET
: The setting is automatically switched to “
AUX2 / STB
”.
OFF : The setting is not automatically switched to “ AUX2 / STB ”. (factory setting)
5. Press [ RETURN] several times to select “ EXIT ” and press [OK]
to fi nish the setting.
To return to the previous display/To cancel during setting operation in steps 2 to 5:
Press [ RETURN].
Connecting cables to audio terminals (DVD player, etc.)
Note
• “ STB AUDIO ” in step 3 is displayed only when the unit is connected to the Panasonic TV (VIERA).
Also, this is not displayed when the step
1
operation is not performed.
• If you change the connection after setting, select “ OFF ” once and “ SET ” again.
• When you select “
EXIT
” and press [OK] in step
3
, the setting mode finishes.
If the optical digital output terminal is available, use connection
A
.
If the optical digital output terminal is not available, use connection
B
.
To listen to the sound through this system after making all the connections select the input mode to “ TV ” and reduce the volume on the television to minimum.
Connect STB, etc. to the HDMI input terminal on this system. ( ➜ pages 10, 13)
If all HDMI input terminals on this system are being used, make this connection.
Main unit
HDMI
input
TV
HDMI Video/
Audio out
Digital
audio out
(optical)
Blu-ray Disc player/
DVD recorder, etc.
Digital audio
out (optical)
STB etc.
Make sure to connect
to .
TO TV (ARC)
HDMI IN
HDMI OUT
HDMI cable
• Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.
TV Audio out
L
R
Main unit
DVD player
etc.
21-pin scart cable
(not supplied)
AV IN
AV
Digital audio
out (optical)