VQT2R71
15
Speaker setting
Speaker setting
Make sure that all equipment has been turned off.
(When the VIERA Link “HDAVI Control” compatible Panasonic TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are
connected, do not turn on TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) until the setting is complete.)
Connect AC mains leads of main unit and 2 speakers to household mains sockets.
(
➜
page 14)
Make sure that the main unit and speakers have been turned off.
Prepare the remote control. (
➜
page 8)
Preparations
Make sure to make this setting when using for the
fi
rst time after purchase.
Setting the speakers
1. Turn the main unit on.
• “
2CH SEARCH
” appears on the display.
(This is displayed only at the first-time setting.)
2. Turn 2 speakers on.
• The colour of [WIRELESS LINK] indicator changes from red to
green.
• When the [WIRELESS LINK] indicator of each speaker lights
green, “
2CH SEARCH
” display disappears.
When installing surround speakers
See “Installing surround speakers” (
➜
page 16) and “Setting
surround speakers” (
➜
page 17).
3. Press and hold [CH] on the remote control about 3 seconds until “
2 SPKR SET
” is
displayed on the main unit’s display.
4. Press the remote control button corresponding to the speaker outputting the con
fi
rmation
sound.
•
Sound is output from either of the speakers.
•
When you press the button corresponding to the con
fi
rmation sound of speaker, another speaker outputs con
fi
rmation sound.
Press the corresponding button in the same way and complete settings for all 2 speakers.
•
When “
COMPLETE
” disappears on the main unit’s display, the speaker setting is complete.
• Check if the speakers are properly set after setting the speakers. (
➜
page 16)
• If the speakers are set incorrectly in step
4
, turn the main unit off then on again and perform steps
3
and
4
.
• If [WIRELESS LINK] indicator does not change from red to green, see page 29 of “Troubleshooting guide”.
Press
[WIRELESS LINK]
indicator
Press
WIRELESS LINK
Always aim the
remote control at
the main unit for
operation.
Press and hold
(about 3 seconds)
“
2 SPKR SET
”
When the sound is
output from the front
speaker (left),
press [GAME].
When the sound is output
from the front speaker
(right), press [MUTE].
Front speaker
(left)
Front speaker
(right)
GAME
MUTE
Note
Connection
