26
RQT7035
S
ound fie
ld/s
ound qua
li
ty
ope
ra
ti
o
n
s
Sound field
You may experience a reduction in sound quality when these sound
field systems are used with some sources. If this occurs, turn the
sound field system off.
≥
Dolby Digital and DTS are digital encoding systems used on DVD
to carry surround sound. Both were originally developed for use in
cinemas.
≥
This unit automatically recognizes and decodes these systems.
Play a Dolby Digital or DTS source.
∫
To down-mix Dolby Digital or DTS (multiple
channel) signals to 2 channels
Press [SHIFT]
i
[MIX 2CH].
To cancel, press [SHIFT]
i
[MIX 2CH]
again.
When “D.MIX” is flashing
[DVD-A]
The DVD-Audio contains multiple-
channel signals that cannot be down-mixed.
Dolby Pro Logic is an active process that enhances sound
localization through the use of a high separation decoding method
providing improved spatiality and a wider listening area. The sense
of directionality is enhanced by the Left, Center, Right and Surround
channels. Dolby Pro Logic decoding is best utilized with sources
encoded in Dolby Surround.
Software encoded with Dolby Surround can be identified with this
mark (DVD, CD, Video CD, Laser Disc, Video tape).
1
Press [
Î
PL].
2
Play a Dolby Surround source.
To cancel
Press [
Î
PL].
[Note]
≥
Turn the Dolby Pro Logic off when playing a DVD recorded with
Dolby Digital or DTS. The surround effects will not be reproduced
correctly if this is left on.
≥
Super Surround (
➡
page 27) switches off.
If the level of the speakers appears to be different while listening to a
source, adjust the level of the speakers to the same apparent level.
Preparation
Dolby Digital and DTS: Turn off the other surround systems.
Dolby Pro Logic: Press [
Î
PL].
1 Press [SHIFT]
i
[TEST] to output a test signal.
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
≥
The surround channel for Dolby Pro Logic is monaural so the
indicator appears as “Sch” instead.
2 Press [VOLUME,
r
] or [
s
] to set the volume level normally
used for enjoying the source.
3 Press [
3
] (to increase) or [
4
] (to decrease).
L, R:
j
16 dB to 0 dB
C, RS, LS, S:
j
10 dB to
i
6 dB
To stop the test signal, press [SHIFT]
i
[TEST] again.
∫
To adjust speaker level during play
1 Press [SHIFT]
i
[CH SELECT] to select the speaker.
Each time you press the buttons:
In Dolby Digital and DTS
Lch
>
Cch
>
Rch
>
RSch
>
LSch
>
SWch
^----------------------------------------------------------------}
SWch: Subwoofer
≥
You can only adjust SWch if the disc includes a subwoofer
channel.
In Dolby Pro Logic
Lch
>
Cch
>
Rch
>
Sch
^-----------------------------------}
2 Press [
3
] (to increase) or [
4
] (to decrease)
L, R:
j
16 dB to 0 dB
C, RS, LS, S:
j
10 dB to
i
6 dB
SW:
j
10 dB to
i
10 dB
[Note]
You can also adjust subwoofer level by pressing [SUBWOOFER
LEVEL].
Dolby Digital and DTS
Software encoded with Dolby
Digital can be identified with
this mark.
Software encoded with DTS
can be identified with this
mark.
SLOW/SEARCH
MENU/
PLAY LIST
TOP MENU/
DIRECT
NAVIGATOR
ENTER
DISPLAY
AUDIO ONLY
FL DISPLAY
PLAY MODE
REPEAT
D.RE-MASTER
S.SRND
SFC
PL
CH SELECT
MIX 2CH
TEST
SUBWOOFER
LEVEL
CENTER
FOCUS
SHIFT
MUTING
TV
VOLUME
SETUP
CANCEL
P.MEMORY GROUP
TIMER
RETURN
X
TUNER/BAND
AV SYSTEM
VCR
TV
TV/AV
RDS
W
1
2
3
4
5
6
7
8
0
S
10/-/--
9
DVD/CD
SKIP
FM MODE
SUBWOOFER
LEVEL,
MIX 2CH
3
,
4
,
2
,
1
ENTER
SHIFT
VOLUME
s
,
r
SFC,
TEST
Î
PL,
CH SELECT
AUDIO ONLY
D.RE-MASTER
S.SRND
CENTER
FOCUS
2CH
Dolby Pro Logic
Speaker level adjustments
PL
