Panasonic SC-BTX75, Руководство по эксплуатации

Страница: 39 / 56

39
VQT2Q72
Optional speaker settings
1
Select “Test” and press [OK].
A test signal is output.
Front (L) ,) Front (R)
2
Press [OK].
The test signal stops.
≥
No signal is output for the subwoofer. To adjust its volume,
see page 18, Adjusting speaker level during play.
To finish the speaker setting
Press [
3
,
4
,
2
,
1
] to select “Complete” and press [OK].
Speaker installation option
You can attach all of the speakers (except subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k g per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
Preparation
Remove the speaker bases.
1
Remove the screw from the speaker.
2
Remove the speaker base.
A
97 mm
B
210 mm to 212 mm
C
48.5 mm
To avoid speaker dropping
e.g.,
[BTX77]
Front speaker
≥ Consult a qualified building contractor to avoid damage to the
wall or speakers.
≥
Use a string of less than
‰
2.0 mm, which is capable of
supporting over 10 k g .
≥ You will need to obtain the appropriate screw eyes to match
the walls or pillars to which they are going to be fastened.
≥
Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
≥
Use a string of less than
‰
2.0 mm, which is capable of
supporting over 10 k g .
e.g.
[BTX77]
Speaker check
L
Complete
Test
R
SW
dB
0 Test
Attaching to a wall
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s) with the hole(s).
e.g., [BTX77] Front speaker
DO NOT DO
≥ In this position, the speaker
will likely fall if moved to the
left or right.
≥ Move the speaker so that
the screw is in this position.
BTX77 BTX75

4.0 mm

7.0 mm to 9.4 mm
At least 30 mm
5.5 mm to 7.5 mm
Wall or pillar
BTX77 BTX75


Front speakers e.g.,

Screw eye
(not included)
Rear of the speaker
Less than 10 cm
String (not included)
Preventing the speakers from falling
Screw eye
(not included)
Wall
Approx.
150 mm
Rear of the speaker
String (not included)
Thread from the wall to the
speaker and tie tightly.
Advanced operations
Optional speaker
settings
VQT2Q72~Body_mst.fm 39 ページ ２０１０年２月１日 月曜日 午前１０時１分