13.3. Checking and Repairing of LCD
P.C.B.
Step 1
Remove Top Cabinet.
Step 2
Remove Front Panel Unit.
Step 3
Position LCD Unit on the insulated material as shown.
Step 4
Attach 5P Cable Wire to the connector (CN2005) on
Main P.C.B..
Step 5
Attach 17P FFC to the connector (CN2003) on Main
P.C.B..
Step 6
LCD P.C.B. can be checked and repaired as diagram
shown.
13.4. Checking and Repairing of
SMPS P.C.B.
Step 1
Remove Top Cabinet.
Step 2
Remove Front Panel Unit.
Step 3
Remove SMPS P.C.B..
Step 4
Position Front Panel Unit as diagram shown.
Step 5
Position SMPS P.C.B. on the insulated material.
Step 6
Attach 5P Cable Wire to the connector (CN2005) on
Main P.C.B..
Step 7
Attach 17P FFC to the connector (CN2003) on Main
P.C.B..
Step 8
Attach 15P Cable Wire to the connector (CN5802) on
SMPS P.C.B..
Step 9
SMPS P.C.B. can be checked and repaired as diagram
shown.
65
Содержание SA-AKX14LM-K
