Panasonic S-22KA1E5S, Руководство по обслуживанию

Страница: 191 / 335

191
15.10 Filter Check Control
•
This control detects the contamination of filter from the accumulated operation time of indoor unit
Model Filter check time (hour)
Wall mounted 360
Except above 1000
•
Accumulated time will be multiplied by a correction factor
Fan Number Group Correction factor (%)
Below Lo 50
Below Me 75
Except above 100
•
To inform user to clean the filter, FILTER RESET display on the wired remote control LCD and FILTER LED on
indoor unit remote control receiver / indicator will blink for 10 seconds each time operation ON and operation
OFF.
Indoor
operation
Filter LED/Filter
RESET LCD
ON
OFF
Blink Blink
10s
10s
15.11 Powerful Operation Control
•
This control activates to increase the output capacity when the indoor unit ON and the temperature difference
between indoor intake temperature and remote control setting temperature is more than 5°C.
Operation Mode Trigger Condition Duration
Cooling Intake Temp – Remote Setting > 5°C 30 minutes
Soft Dry Intake Temp – Remote Setting > 5°C 30 minutes
Heating Intake Temp – Remote Setting < 5°C 60 minutes
•
During Powerful operation:
i. The internal target of setting temperature will be shift 2°C DOWN for Cooling / Soft Dry and 2°C UP for
Heating.
ii. With the new internal target of setting temperature, the compressor frequency is increase and output
capacity will increase.
iii. After 30 minutes of powerful operation or the temperature target is achieved, the powerful operation
control will be ended and the internal temperature target will back to normal.