lower back
lower body
back
neck/shoulder hands/arms
OK
self program time input
user
user
user
user
self program
time
user
23
USING THE SELF PROGRAM
Changing Time Settings Part Way through a Massage
1. Open the cover and input the time
settings.
(1) Open the cover and input the time
settings you want to change.
(2) Press after completing setting
adjustments.
The program will be reconfigured
to reflect the change(s) made to
settings.
(1) Press .
(2) Press the button used
to record your data.
(3) Press .
Changing Recorded Time Settings
See “Changing Time Settings Part Way through a Massage” above.
• The recorded time settings will
be displayed.
The program with the recorded
time settings will begin
immediately.
OK
2. Close the cover.
• If the cover is left open, you will be unable
to use the Leg Stretch OFF/ON, Back
Vibration OFF/ON, Program Strength or
Focus buttons during the massage.
• This indicates that settings have already been recorded using that User Memory button.
To record over the existing data, press the same button once more. (The existing data
will be deleted.)
To keep the existing data, press another User Memory button.
Saving Time by Recording Time Settings
Advanced Usage
Recording Time Settings
Beginning a Massage Using Recorded Time Settings
When the Selected Button Flashes Rapidly
After the massage finishes or is pressed to finish the massage, proceed as follows.
When the
buttons flash…
Press the User Memory button you
want to record your settings to.
Rapid Flashing
Only Pressed Button
Flashes
Recording Complete
22
self program
time
The display will flash.
lower back
lower body
back
neck/shoulder hands/arms
OK
self program time input
(1) Set the time for each area of the body.
• The time will change, as shown below,
according to the number of times pressed.
(2) Press after completing settings for each body area.
• The selected program will be configured to reflect your time settings.
2. Press .
3. Open the cover and input the time settings.
4. Close the cover.
• If the cover is left open, you will be unable to use the Leg Stretch OFF/ON, Back Vibration OFF/ON, Program
Strength or Focus buttons during the massage.
OK
From this point on the instructions for operation are the same as those for those once a massage
program is selected, as covered starting from step 2 of page 16.
Strength adjustment, on/off switching of leg stretch and back vibration functions are performed in
the same way. (See Page 19)
• The duration of a massage in the self program mode is approximately 15 minutes.
• Body scanning is not performed when all time settings for the upper body are set to zero. Upper-body vibration will
also be inactive in this case.
• If time settings for the lower body are set to zero, the massage will commence with leg stretch function set to off.
This function may be turned on by pressing the Leg Stretch OFF/ON button.
