knead
knead
A
B
A
B
intensity intensity
lower
body
hands/
arms
vibration
leg stretch
31
Press .
Combining with the Leg Stretch Function
(Press again to turn off.)
leg stretch
2
Pressed One Time
Knead A + Knead B
Control
Display
Raised
approximately 55
°
.
Pressed Two Times
Knead A
Pressed Three Times
Knead B
knead
A
B
knead
A
B
knead
A
B
3. Adjust to your preferred level of strength.
4. When the massage is finished the unit will automatically shut off.
(The massage will finish approximately 15 minutes after it starts.)
• It will take a number of seconds for the air to be completely released. (After pressing you will hear air
being released.)
• Press if you want to stop the massage during a program. Press if you want to stop the massage
immediately. (See Page 18)
USING MANUAL OPERATION (Lower Body)
Manual Operation for Massage of the Lower Body
1. Press to turn on the power.
2. Select your massage action of preference.
• The selected massage action may be changed to another
part way through the massage. If this is done the massage
will start again once the air has been released.
• Only the legrest will automatically
rise to the correct massage
position.
Leg Stretch OFF/ON button
Massage Strength button
intensity
Press .
• The strength of the massage is shown on the Lower Body Massage Display in five stages.
• The massage strength can be adjusted until a "beep-beep-beep" sound is heard.
• The strength of the leg stretch and back vibration functions is not adjustable.
Leg
Stretch
The display will indicate whether the leg stretch
function is turned on or off.
(Lit areas indicate active functions. Unlit areas
indicate inactive functions.)
30
intensity
speed
position
lateral
vibration
3. Adjust massage position and strength.
(These adjustments cannot be made with the controller cover closed.)
4. When the massage is finished the unit will automatically shut off.
(The massage will finish approximately 15 minutes after it starts.)
• The massage heads will retract and then stop.
Adjusting Massage Position
Press .
Press .
Press .
• The approximate position of the massage will be shown on the Massage Area Display.
• If you hold the up or down button down the massage heads will continue to move until you release
the button.
• In some places the strength of the massage will be automatically reduced. (See Page 33)
• In some cases the massage position will not immediately change even though the Roller Position
button is pressed.
Adjusting Massage Strength
Press .
Press .
• The strength of the massage is shown on the Upper Body Massage Action Display in five stages.
• In some cases the degree to which the strength of the massage can be adjusted will depend on
the area being massaged. (See Page 33)
• In some cases the massage strength will not immediately change even though the Massage
Strength button is pressed.
• The strength of the back vibration function is not adjustable.
Adjusting Massage Speed
• The speed of the massage is shown on the Upper Body Massage Display in five stages.
• The speed of the back vibration function is not adjustable.
Adjusting Lateral Movement
• Press this button to increase the width of the massage in the location the massage
heads were in when you pressed the button.
• will be shown on the display.
• In some places the strength of the massage will be automatically reduced.
(See Page 33)
• Back vibration cannot be combined.
• Press the button again to revert to normal massage action.
Combining with the Back Vibration
The display will indicate whether the back
vibration function is turned on or off.
(Lit areas indicate active functions. Unlit
areas indicate inactive functions.)
(Press again to turn off.)
Back
Vibration
