Panasonic PV-M2738 Operating, Руководство по обслуживанию

Страница: 23 / 151

2-2
TV
CRT C.B.A.
Anode Cap
2 VCR Unit
P354
P4605
Stereo
Amp
C.B.A.
P4602
P4604
TV Main C.B.A.
P1002
Deflection Yoke
Connector
P805
TV Power C.B.A.
P3002
P806
P4207
(Model:
B, C)
Hi-Fi Audio
C.B.A. (Model: B, C)
Main C.B.A.
Clamper
Clamper
Clamper
Clampers
VCR Unit
Disassembly Procedure
1. Discharge the Anode to the CRT Ground. Then, remove
the Anode Cap.
2. Disconnect the Connector P354 from the CRT C.B.A.
3. Carefully pull out the CRT C.B.A. from the CRT Unit.
4. Disconnect the Deflection Yoke Connector from the TV
Main C.B.A.
5. Disconnect 4 Connectors P4602, P4604, and P4605 on the
Stereo Amp C.B.A. and remove the leads from the clampers.
6. Disconnect 2 Connectors P1002 and P3002 on the Main
C.B.A. and remove the leads from the clamper.
7. (Model: B, C)
Disconnect Connector P4207 on the Hi-Fi Audio C.B.A.
and remove the leads from the clampers.
8. Disconnect 2 Connectors P805 and P806 on the TV Power
C.B.A. and remove the leads from the clampers.
Fig. D3-1
9. Slightly lift up the rear side of the VCR Unit to release 2 Tabs
(B).
10. Slide the VCR Unit out as far as it will go.
Then, lift up the VCR Unit to release 2 Guide Tabs (A) and
remove the VCR Unit all the way out from the TV cavity.
Opener Lever
Cassette Door Tab
View "A"
Cassette Door-Lid
Cassette Door-Lid
VCR Unit
View "A"
Press
CAUTION
VCR Unit
VCR Unit
Holes (A)
Guide Tabs (A)
Bottom view of VCR Unit
Hole (B)
Tabs (B)
Hole (B)
Fig. D3-2
Reassembly Notes
1. Installation of VCR Unit
CAUTION
1) When installing the VCR Unit, swing the Cassette Door-
Lid all the way open until the Cassette Door tab clears
the Opener Lever.
2) Make sure that all guide tabs are aligned properly.
Then, press the VCR unit in.
Fig. D3-3