Panasonic PV-M2738 Operating, Руководство по обслуживанию

Страница: 27 / 151

2-6
12 Mechanism
Chassis
Guide Holes
Guide Holes
Pin
Pin
Holder
Unit
Drive Rack
Arm
Pin
Screw (K)
Screw (J)
Screw (J)
Spring (A)
Locking
Tab (G)
11 Cassette Up
Ass'y
Cassette Up Ass'y
Disassembly Procedure
1. Slide Holder Unit (refer to "Method for Loading/Unloading
of Mechanism" in Service Notes) to gain access to 2
Screws (J) for removal.
2. Remove Screw (K).
3. Unhook Spring (A).
4. Slide the Cassette Up Ass'y towards the front to release
Locking Tab (G). Then, lift it up and remove.
Fig. D12
Reassembly Notes
Installation of Cassette Up Ass'y
1) Confirm that the 3 pins and Locking Tab (G) under the
Cassette Up Ass'y are in each of the 4 Guide Holes on the
Mechanism Chassis when installing the Cassette Up Ass'y.
Then, slide the Cassette Up Ass'y towards the back.
2) Slide Holder Unit (refer to "Method for Loading/Unloading
of Mechanism" in Service Notes) to tighten 2 Screws (J)
and Screw (K).
Be careful not to tighten screws too much, or the Cassette
Up Ass'y may be bent outward.
Then, slide it back to the
EJECT
Position.
3) Hook Spring (A) to the Drive Rack Arm on the Mechanism
Chassis.