Panasonic PT-VW431DU Скачать руководство пользователя страница 80

Страница: 80 / 102

- ENGLISH

Maintenance

Replacement

Before replacing the unit

When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect

the power plug from the wall outlet. (

pages 27, 31)

Be sure to observe the procedure “Turning off the projector” (

page 31) when performing power supply

operation.

Maintenance

Outer Case

Wipe off dirt and dust using a soft dry cloth.

If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector

with a dry cloth.

Do not use benzene, thinner, or rubbing alcohol, other solvents, household cleaners. Using them may

cause deterioration of the outer case.

When using chemical treated dusters, follow its instruction.

Front glass surface of the lens

Wipe off the dirt and dust off the front surface of the lens with soft clean cloth.

Do not use a cloth that has an abrasive surface or a cloth that is moist, oily, or covered with dust.

Do not use excessive force when wiping the lens as it is fragile.

Attention

The lens is made of glass. Impacts or excessive force when wiping may scratch its surface.

Please handle with care.

Replacing the unit

Air filter units

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter become

clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup

and adversely affect the life of the projector.

If the air filter units become clogged, it will result in internal heat buildup, the power of the projector may

be turned off for safety.

If a “Filter warning” icon appears on the screen, replace the filters immediately.

Consult your dealer to purchase a replacement air filter unit (ET-RFV200).

Содержание PT-VW431DU







































































































Результаты поиска

Содержание PT-VW431DU

Отзывы:

Похожие инструкции для PT-VW431DU

Бренды по названию

Популярные бренды

Panasonic PT-VW431DU, Руководство по эксплуатации

Результаты поиска

Содержание PT-VW431DU

Отзывы:

Похожие инструкции для PT-VW431DU

Бренды по названию

Популярные бренды