Panasonic PT-VW431DU Скачать руководство пользователя страница 26

Страница: 26 / 102

- ENGLISH

Getting Started

Connections

Before connecting to the projector

Read carefully the instruction manual for the device to be connected.

Turn off the power switch of the devices before connecting cables.

If any connection cable is not supplied with the device, or if no optional cable is available for connection of the

device, prepare a necessary system connection cable to suit the device.

Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture.

In this case, a time base corrector (TBC) must be connected.

The projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level) and

digital signal.

Some computer models are not compatible with the projector.

When using long cables to connect with each of equipment to the projector, there is a possibility that the image

will not be output correctly unless a compensator is used.

For details on what video signals the projector supports, see “List of compatible signals”. (

pages 94-97)

Connecting example

Attention

When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between

the projector and the video deck.

If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the

projector and the video deck.

Note

When using an HDMI cable, check that it is compliant with the HDMI standard. Using a cable that is not compliant with the

HDMI standard may result in problems such as the image cutting out or not appearing.

When connecting the 1 080p signal using HDMI, use a cable compliant with 1 080p signal.

This projector does not support the Viera link (HDMI).

The twisted pair cable Extender, such as Digital Interface Box (Optional accessory: ET-YFB100G) is used for sending video

and audio signals via a twisted pair cable, and the <DIGITAL LINK> jack of the projector can be used for receiving these

digital signals. For details on connection, please see "Twisted pair cable Extender connections". (

page 66)

Computer

Audio equipment

Control computer

Video deck

(TBC built-in)

Video deck

(TBC built-in)

Blue ray player

When connecting with ET-YFB100G

(Optional accessory)

Projector rear

terminals

Projector rear terminals

MIC

Connection example for twisted pair cable

transmitter

Normal external equipment connection example

Control computer

Содержание PT-VW431DU







































































































Результаты поиска

Содержание PT-VW431DU

Отзывы:

Похожие инструкции для PT-VW431DU

Бренды по названию

Популярные бренды

Panasonic PT-VW431DU, Руководство по эксплуатации

Результаты поиска

Содержание PT-VW431DU

Отзывы:

Похожие инструкции для PT-VW431DU

Бренды по названию

Популярные бренды