Panasonic PT-VW431DU Скачать руководство пользователя страница 81

Страница: 81 / 102

Replacement

ENGLISH -

Maintenance

The air filter units are provided in side and back of the projector.

Replacement of the air filter unit (side)

Remove the air filter cover.

1 )

Open the air filter cover in the direction of the

arrow in the figure and remove it.

Remove the air filter unit.

2 )

i) Hold the knob of the air filter unit and pull out in

the direction of the arrow, the top of the air filter

unit will pop up.

ii) Take out the air filter unit upwards.

After removing the air filter unit, remove large

foreign objects and dust from the air filter

compartment and the projector’s air intake port

if there are any.

Insert the new air filter unit.

3 )

Hold the air filter unit that the knob is outside of

the projector, perform Step 2) in the reverse order.

Do not press the filter part when push into the

projector at last.

Install the air filter cover.

4 )

Make sure that the air filter cover is closed tightly.

Air filter

cover (back)

Air filter unit (back)

Knob

Air filter cover (side)

Knob

Air filter unit (side)

Resetting the Filter Counter

Be sure to reset the Filter counter after replacing the filter. (

page 59 "

Filter counter reset

Attention

Turn off the power before you replace the air filter units.

When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is

safe, even in the event of the air filter unit dropping.

Do not operate the projector with the air filter units removed. Dust may accumulate on the optical elements

degrading picture quality.

Do not put anything into the air vents. Doing so may result in malfunction of the projector.

The air filter unit to be replaced should be an unused product.

After replacing the air filter, reset the filter counter. Otherwise, the power of the projector may be turned off for

safety.

Replacement of the air filter unit (back)

Remove the air filter cover.

1 )

Open the air filter cover in the direction of the

arrow in the figure and remove it.

Remove the air filter unit.

2 )

Hold the knob of the air filter unit and pull out

in the direction of the arrow.

After removing the air filter unit, remove large

foreign objects and dust from the air filter

compartment and the projector’s air intake port

if there are any.

Insert the new air filter unit.

3 )

Hold the air filter unit that the knob is outside of

the projector, perform Step 2) in the reverse order.

Do not press the filter part when push into the

projector at last.

Install the air filter cover.

4 )

Make sure that the air filter cover is closed tightly.

Содержание PT-VW431DU







































































































Результаты поиска

Содержание PT-VW431DU

Отзывы:

Похожие инструкции для PT-VW431DU

Бренды по названию

Популярные бренды

Panasonic PT-VW431DU, Руководство по эксплуатации

Результаты поиска

Содержание PT-VW431DU

Отзывы:

Похожие инструкции для PT-VW431DU

Бренды по названию

Популярные бренды