Panasonic PT-VMZ71, Руководство по эксплуатации

Страница: 48 / 167

Making adjustments and selections
It is recommended that images are projected continuously for at least 30 minutes before the focus is adjusted.
6)
1)8)
5) 5)
3)
3)
7)
2)
2)
7)
4)
4)
4)
1) Roughly adjust the focus of the image with the focus lever. (
x
page 52)
2) Change the settings of the [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the
installation mode. (
x
page 32)
f
Refer to “Navigating through the menu” (
x
page 62) for the operation of the menu screen.
3) Press the input selection buttons on the remote control or the <INPUT SELECT> button on the control
panel to select the input signal.
f
The buttons that can be used on the remote control are as follows.
<HDMI 1> button, <HDMI 2> button, <DIGITAL LINK>
*1
button, <COMPUTER 1/2> button, <NETWORK/
USB> button
*1 Not available for the remote control supplied with PT-VMZ51S and PT-VMZ41.
4) Adjust the front, back and sideway tilt of the projector with the adjustable feet. (
x
page 52)
5) Adjust the horizontal / vertical projection position with the horizontal / vertical lens shift dial.
(
x
page 52)
6) Adjust the size of the image to match the screen with the zoom lever. (
x
page 52)
7) If the input signal is an analog RGB signal, press the <AUTO SETUP> button.
8) Adjust the focus again with the focus lever.
Note
f
When the projector is switched on for the first time after purchase, the [INITIAL SETTING] screen and the [ADMINISTRATOR ACCOUNT] screen
are displayed in order after the projection starts. When the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is executed, the [INITIAL SETTING]
screen is displayed after the projection starts. When the [NETWORK] menu → [INITIALIZE] is executed, the [ADMINISTRATOR ACCOUNT]
screen is displayed after the projection starts next time. For details, refer to “When the initial setting screen is displayed” (
x
page 44) and
“When the administrator account setting screen is displayed” (
x
page 46).
48 - ENGLISH
Chapter 3 Basic Operations - Switching on/off the projector