Panasonic PT-VMZ71, Руководство по эксплуатации

Страница: 154 / 167

r
Transmitted data
Header Data section Termination symbol
Command
example
‘0’
0x30
‘0’
0x30
Control command
(ASCII string)
(CR)
0x0d
Data length 1 byte 1 byte Undefined length 1 byte
f
Example: Transmission of power supply status acquisition command
“00QPW” (CR)
r
Received data
Header Data section Termination symbol
Command
example
‘0’
0x30
‘0’
0x30
Control command
(ASCII string)
(CR)
0x0d
Data length 1 byte 1 byte Undefined length 1 byte
f
Example: The projector is in standby status
“00000” (CR)
r
Error response
String Details Termination symbol
Message
"ERR1" Undefined control command
(CR)
0x0d
"ERR2" Out of parameter range
"ERR3" Busy state or no-acceptable period
"ERR4" Timeout or no-acceptable period
"ERR5" Wrong data length
Data length 4 bytes ― 1 byte
Note
f
The projector automatically disconnects from the network immediately after sending the command. Such specifications are made from the
viewpoint of security, such as prevention of illegal operation of the projector by a malicious third party. To send commands continuously,
make a request for network connection every time and send it. For details, see “Communication flow between the server and the client”
(
x
page 154).
Communication flow between the server and the client
When sending / receiving commands via LAN, refer to the communication flow shown below.
Server : the projector
Client : the control device such as a computer
Client
Server
First session
Second session
Connection query
Sending key
Send first command
Respond first command
Cut off
Connection query
Sending key
Send second command
Respond second command
Cut off
154 - ENGLISH
Chapter 7 Appendix - Technical information