Basic operations
22
ENGLISH
Project an image
Preparations
Confirm the connections of the peripheral devices
•
(
page 16, 17) and power cord (
page 18).
Switch on the power
•
(
page 20) to start projecting.
Select the input signal and adjust the image.
•
SELECT THE INPUT SIGNAL
1
Switch on the connected devices.
When playing a connected DVD player, if
SIGNAL
SEARCH
(
DISPLAY OPTION
menu) is set to
ON
, the input signal is detected and projected
automatically when the projector is switched on.
(
page 35)
Set the
•
INPUT GUIDE
(
DISPLAY OPTION
ON-SCREEN DISPLAY
menu) to
DETAILED
. If
the projector cannot detect any input signal, the
“Computer connection guide” will be displayed.
(
page 33)
2
Select an input signal.
The image selected with any of the
[INPUT
SELECT]
button is projected.
NOTE:
Change the settings in the
•
PICTURE
menu according to the
connected device for example DVD, video tape, etc., to be
played. (
page 28)
Confirm the aspect ratio of the screen and image.
•
Select the optimum aspect ratio. (
page 31)
POSITION THE IMAGE
When setting up the projector for the first time or
setting up at a new place, you must perform the
following operations.
1
Adjust the vertical angle of the projector.
Place the projector at the right angle from the
•
screen.
Press the leg adjuster button
•
and adjust
the vertical projection angle. Then, adjust the
projected image to the center of the screen.
2
Adjust the projection focus.
Turn the focus ring to adjust the projected image.
•
NOTE:
If keystone distortion occurs, see KEYSTONE.
•
(
page 30)
If the focus is adjusted, the shape (distortion) of the
•
projected image changes. Adjust while checking the
balance between the general focus of the projected image
and shape (distortion).
Focus ring
(FOCUS)
Leg adjuster
