Preparation
ENGLISH
13
Details of your projector (continued)
PROJECTOR’S REMOTE CONTROL
Top and rear view
Remote control
signal emitters
Installing/removing batteries
Press the tab and lift up the
cover.
Insert the batteries according to the
polarity diagram indicated inside or
remove.
Remove the batteries in the reverse
order to setting.
Use only manganese batteries.
Front view
AUTO
SETUP
MENU
RETURN
ENTER
FREEZE
AV
MUTE
COMPUTER
VIDEO
DEFAULT FUNCTION
WIN.
INDEX-
DIGITAL ZOOM
VOLUME
①
⑤
②
③
④
⑥
⑦
⑫
⑪
⑩
⑧
⑨
①
POWER
Switch between standby mode and projection
mode. (
page 20, 21)
②
Display the Main menu. (
page 27)
③
Navigate through the menus with
[
]
and
confirm the selection with
[ENTER]
. (
page 26)
④
Capture the projected image as a frozen picture.
(
page 23)
⑤
Switch the required input signal button to select.
(
page 23)
⑥
Reset some of the settings to the factory default
settings. (
page 24)
⑦
Control the zoom size. (
page 25)
⑧
Control speaker volume. (
page 24)
⑨
Create shortcut assigned to certain selected
function. (
page 25, 38)
⑩
Display frozen image while the display of
subsequent images continues. (
page 24)
⑪
Turn off the projection temporarily. (
page 23)
⑫
Detect the input signal.
Adjust the settings of
SHIFT
,
DOT CLOCK
and
CLOCK PHASE
in the
POSITION
menu
automatically for
COMPUTER
signals. (
page 23)
NOTE:
Do not drop the remote control.
•
Avoid contact with liquids or moisture.
•
Do not attempt to modify or disassemble the remote control.
•
Do not let strong light shine onto the signal receptor which will cause a malfunction.
•
The remote control operates within the range of 7 m (23' 0"), approximately ±30 ° vertically and horizontally from the projector
•
avoiding any obstacles.
The operating range may differ due to the screen material and may not be effective with a translucent screen.
•
