Basic operations
ENGLISH
21
Turn the projector ON or OFF (continued)
TURN THE PROJECTOR OFF
AUTO
SETUP
MENU
RETURN
ENTER
FREEZE
AV
MUTE
STANDBY
(
R
)
ON
(
G
)
1) 2)
When operating the projector, check the status of the
POWER
indicator. (
page 19)
1
Press the POWER button.
A confirmation screen will be displayed – the
screen will go off and return to projection if there
is no operation for approximately 10 seconds.
2
Press the button again.
The lamp goes off and the projection stops.
The cooling fan continues its rotation and
•
POWER
indicator lights orange. Wait until the
POWER
indicator turns red.
If
•
STANDBY MODE
is set to
NORMAL
, the
POWER
indicator flashes red.
(
page 37)
3
After the POWER indicator lights or flashes
in red, disconnect the power plug from the
socket.
(
page 18)
For urgency, you may disconnect the power
•
plug immediately since the
DIRECT POWER
OFF
function is installed.
NOTE:
Confirm that
•
CONTROL PANEL
(when operating with
the projector body) or
REMOTE CONTROLLER
(when
operating with the remote control) under
CONTROL
DEVICE SETUP
in the
SECURITY
menu is set to
ENABLE
.
(
page 42)
Power can be turned off by pressing
•
[POWER]
for
at least 0.5 seconds.
POWER
indicator
