Panasonic PT-RZ990, Руководство по эксплуатации

Страница: 212 / 240

Chapter 7 Appendix — Technical information
212 - ENGLISH
Class Command Control details
Parameter/response
string
Remark
2 INNM ?
Input terminal name
query
11 / RGB1
Returns input terminal name.
12 / RGB2
31 / DVI-D
32 / HDMI
33 / DIGITAL LINK
34 / SDI
2 IRES ?
Input signal resolution
query
AAAAxBBBB
AAAA: Horizontal resolution
BBBB: Vertical resolution
2 RRES ?
Recommended
resolution query
1920 x 1200 Returns display resolution.
2
FREZ Freeze control 0 Freeze clear
FREZ ? Freeze status query 1 Freeze (stop)
2 POWR
Cooling notification 0 Notifies when the power is turned off.
Warmup notification 1 Notifies when the power is turned on.
2 ERST Error notification xxxxxx Notifies when an error occurs.
2 LKUP Link up notification xx:xx:xx:xx:xx:xx
Notifies the MAC address when the PJLink communication
becomes possible.
2 INPT
Input switch completion
notification
11 RGB1
12 RGB2
31 DVI-D
32 HDMI
33 DIGITAL LINK
34 SDI
2 SRCH Projector search ACKN=xx:xx:xx:xx:xx:xx
The projector connected to the same network that can
communicate with PJLink will respond with its MAC address.
PJLink security authentication
A PJLink password for security authentication is required for PJLink command communication.
The PJLink password can be set from the [NETWORK] menu
→ [PJLink] → [PJLink PASSWORD] (
x
page 171)
or from the [Set up password] page (
x
page 192) of the web control screen.
When using the PJLink commands without security authentication, set the PJLink password to blank. The factory
default setting of PJLink password is blank.
f
For specifications related to PJLink, visit the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/
Using Art-Net function
Since the network function of the projector supports the Art-Net function, you can control the projector settings
with the DMX controller and application software using the Art-Net protocol.
Note
f
Setting the password of the administrator account (
x
page 168) is required for using the Art-Net function of the projector.
Channel definition
The following table lists the channel definitions used for controlling the projector with the Art-Net function.
Channel settings can be switched using the [NETWORK] menu
→ [Art-Net] → [Art-Net CHANNEL SETTING]
(
x
page 173).
The control details assigned to each channel are listed in the following table.
f
Channel assignment for [USER] is in factory default setting. Assignment can be changed.
Channel
Control details
[2] [USER] [1]
CHANNEL1 LIGHT OUTPUT LIGHT OUTPUT SHUTTER
CHANNEL2 INPUT SELECT INPUT SELECT INPUT SELECT
CHANNEL3 LENS POSITION LENS POSITION LENS FUNCTION SELECT
CHANNEL4 LENS H SHIFT LENS H SHIFT LENS CONTROL