Panasonic PT-RZ990, Руководство по эксплуатации

Страница: 173 / 240

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 173
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the Art-Net function.
[ON(2.X.X.X)] Enables the Art-Net function and sets the IP address to 2.X.X.X.
[ON(10.X.X.X)]
Enables the Art-Net function and sets the IP address to 10.X.X.X.
[ON(MANUAL)] Enables the Art-Net function and uses the IP address set in [WIRED LAN].
f
Proceed to Step 5) when anything other than [OFF] is selected.
5) Press the <ENTER> button.
f
The
[Art-Net SETUP]
screen is displayed.
6) Press
as
to select an item, and press
qw
to switch the setting.
[NET] Enter [NET] to be used when the projector processes Art-Net.
[SUB NET]
Enter [SUB NET] to be used when the projector processes Art-Net.
[UNIVERSE] Enter [UNIVERSE] to be used when the projector processes Art-Net.
[START ADDRESS]
Enter [START ADDRESS] to be used when the projector processes Art-Net.
7) Press
as
to select [STORE], and press the <ENTER> button.
f
The confirmation screen is displayed.
8) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.
[Art-Net CHANNEL SETTING]
Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to “Using Art-Net
function” (
x
page 212).
1) Press
as
to select [Art-Net].
2) Press the <ENTER> button.
f
The [Art-Net] screen is displayed.
3) Press
as
to select [Art-Net CHANNEL SETTING].
4) Press
qw
to switch the item.
[2]
Uses the channel assignment in standard setting.
[USER] Changes the channel assignment.
[1]
Uses the channel assignment with DZ21K series compatible.
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
f
When [2] or [1] is selected, the function assigned to the channel is displayed by pressing the <ENTER>
button.
f
When [USER] is selected, proceed to Step 5) .
5) Press the <ENTER> button.
f
The [CHANNEL SETUP] screen is displayed.
6) Press
as
to select the channel to set, and press
qw
to switch the item.
[LIGHT OUTPUT] Adjusts the amount of light.
[INPUT SELECT] Switches the input.
[LENS POSITION] Moves the lens position.
[LENS H SHIFT] Adjusts the lens shift in the horizontal direction.
[LENS V SHIFT] Adjusts the lens shift in the vertical direction.
[LENS FOCUS] Adjusts the focus.
[LENS ZOOM] Adjusts the zoom.