Panasonic PT-RZ990, Руководство по эксплуатации

Страница: 171 / 240

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 171
[COMMAND PORT] Set the port number used for command control.
[Crestron Connected(TM)] Set to [ON] to control with Crestron Connected of Crestron Electronics, Inc.
[AMX D.D.]
Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, visit the
website of AMX Corporation.
URL http://www.amx.com/
4) Press
as
to select [STORE], and press the <ENTER> button.
f
The confirmation screen is displayed.
5) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
[PJLink]
Set the PJLink function to control and monitor the projector using the PJLink protocol.
Setting the password of the administrator account is required (
x
page 168) for using the PJLink function of the
projector.
Note
f
If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
[PJLink PASSWORD]
Set the password for security authentication which is required when connecting to the projector.
1) Press
as
to select [PJLink].
2) Press the <ENTER> button.
f
The [PJLink] screen is displayed.
3) Press
as
to select [PJLink PASSWORD], and press the <ENTER> button.
f
The [PJLink PASSWORD] screen is displayed.
4) Press
as
to select [PASSWORD] under [CURRENT], and press the <ENTER> button.
f
The [PASSWORD] screen is displayed.
5) Press
asqw
to select a character, and press the <ENTER> button.
f
Enter the current password.
f
The factory default setting of password is blank.
6) After entering the password, press
asqw
to select [OK], and press the <ENTER> button.
f
The [PJLink PASSWORD] screen is displayed.
7) Press
as
to select [PASSWORD] under [NEW], and press the <ENTER> button.
f
The [PASSWORD] screen is displayed.
8) Press
asqw
to select a character, and press the <ENTER> button.
f
Enter a new password.
f
Up to 32 alphanumeric characters can be entered.
9) After entering the password, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[PJLink PASSWORD]
screen is displayed.
10) Press
as
to select [PASSWORD CONFIRM], and press the <ENTER> button.
f
The [PASSWORD CONFIRM] screen is displayed.
11) Enter the password entered in Step 8).
12)
After entering the password, press
asqw
to select [OK], and press the <ENTER> button.
f
The [PJLink PASSWORD] screen is displayed.