Chapter 1
Preparation — About your projector
ENGLISH - 29
7 Adjustable feet
Adjusts the projection angle.
8 Air intake port
9 Screw holes for eyebolts
Screw diameter: M10, tapping depth inside the projector:
35 mm (1-3/8")
10
Air filter cover
The air filter unit is inside.
11 Remote control signal receiver (rear)
12 Air exhaust port
13 Control panel (
x
page 30)
14 Connecting terminals (
x
page 31)
15 Security slot
This security slot is compatible with the Kensington security
cables.
16 <AC IN> terminal
Connect the supplied power cord.
17 <MAIN POWER> switch
Turns on/off the main power.
3
2
1
2
Projection direction
Bottom
Top
WARNING
Do not touch the top surface of the projector during use.
f
Doing so may result in burns, as the top surface is hot during
use and for a while after use.
1 Screw holes for eyebolts
Screw diameter: M10, tapping depth inside the projector:
35 mm (1-3/8")
2 Handle
Hold the handle with your hand when carrying the projector.
3
Screw holes to fix the projector
Screw diameter: M10, tapping depth inside the projector:
30 mm (1-3/16")
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
