Panasonic PT-MZ880 Скачать руководство пользователя страница 64

Страница: 64 / 207

Chapter 3

Basic Operations — Operating with the remote control

64 - ENGLISH

Adjusting the volume

Adjust the volume of audio output.

button

1) Press the <VOL-> button/<VOL+> button on the remote control.

<VOL+>

Increases the volume.

<VOL->

Decreases the volume.

Note

This operation can be also performed using

on the control panel.

Using the freeze function

The projected image can be paused and audio can be turned off regardless of the playback of the external device.

button

1) Press the <FREEZE> button.

The image freezes and audio is muted.

2) Press the <FREEZE> button again.

Freezing of the image is canceled and audio is turned on.

Note

[FREEZE] is displayed on the screen when video is paused.

When freezing of the moving image is canceled, the image may disappear or be disrupted temporarily.

Using the on-screen display function

Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen display,

such as the menu or the input terminal name.

button

1) Press the <ON SCREEN> button.

The on-screen display disappears.

2) Press the <ON SCREEN> button again.

The on-screen display appears.

Note

If you press the <MENU> button on the control panel for at least three seconds while the on-screen display is off (hidden), the on-screen

display is turned on.

Содержание PT-MZ880
















































































































































































































Результаты поиска

Содержание PT-MZ880

Отзывы:

Panasonic PT-MZ880, Руководство по эксплуатации, Страница: 64 / 207

Результаты поиска

Содержание PT-MZ880

Отзывы: