Panasonic PT-MZ880 Скачать руководство пользователя страница 59

Страница: 59 / 207

Chapter 3

Basic Operations — Projecting

ENGLISH - 59

Projecting

Check the external device connection (

page 43) and the power cord connection (

page 49), and turn on

the power (

page 51) to start projection. Select the image to project, and adjust appearance of the projected

image.

Selecting the input signal

The input of the image to project can be switched. Method to switch the input is as follows.

Press the input selection button on the remote control and directly specify the input of the image to project.

Press the <INPUT SELECT> button on the control panel to display the input selection screen, and select the

input to project from the list.

Remote control

Control panel

Switching the input directly with the remote control

The input for projection can be switched by directly specifying it with the input selection button on the remote

control.

Press the input selection button (<HDMI 1>, <HDMI 2>, <HDMI 3>, <COMPUTER>, <DIGITAL LINK>).

<HDMI 1>

Switches the input to HDMI1.

The image of the signal input to the <HDMI IN 1> terminal is projected.

<HDMI 2>

Switches the input to HDMI2.

The image of the signal input to the <HDMI IN 2> terminal is projected.

<HDMI 3>

Switches the input to HDMI3.

The image of the signal input to the <HDMI IN 3> terminal is projected.

<COMPUTER>

Switches the input to COMPUTER.

The image of the signal input to the <COMPUTER IN> terminal is projected.

<DIGITAL LINK>

Switches the input to DIGITAL LINK.

The image of the signal input to the <DIGITAL LINK/LAN> terminal is projected.

Attention

Images may not be projected properly depending on the external device, or the Blu-ray disc or DVD disc, to be played back.

Set the [PICTURE] menu

→

[SYSTEM SELECTOR].

Confirm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio from the [POSITION] menu

→

[ASPECT].

Note

When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the <DIGITAL LINK/

LAN> terminal, the input on the DIGITAL LINK output supported device changes each time the <DIGITAL LINK> button is pressed. The input

can also be changed using the RS-232C control command.

For twisted-pair-cable transmitters of other manufacturers, switch the input on the projector to DIGITAL LINK, and then switch the input on

the twisted-pair-cable transmitter.

Switching the input by displaying the input selection screen

The input for projection can be selected by displaying the input selection screen using the <INPUT SELECT>

button on the control panel.

1) Press the <INPUT SELECT> button on the control panel.

The input selection screen is displayed.

Содержание PT-MZ880
















































































































































































































Результаты поиска

Содержание PT-MZ880

Отзывы:

Panasonic PT-MZ880, Руководство по эксплуатации, Страница: 59 / 207

Результаты поиска

Содержание PT-MZ880

Отзывы: