Panasonic PT-MZ880, Руководство по эксплуатации, Страница: 10 / 207

10 - ENGLISH
Read this first!
r
Hazard distance (IEC 62471-5:2015)
The distance from the projection lens surface, at which the emission reaches the Accessible Emission Limit (AEL)
of risk group 2, is known as the hazard distance (HD) or safety distance. The area where the emission exceeds
the Accessible Emission Limit of risk group 2 is called the hazard zone (HZ).
Within the hazard zone, never look into the light projected from the projector. The eyes may be damaged by direct
irradiation even if you look at the light just for a moment. If you are outside the hazard zone, it is considered to be
safe in all circumstances except deliberately staring into the light projected from the projector.
HD
D3
D4
HZ
HD
D1
D2
HZ
r
Risk group
The combination of the projector and the projection lens is categorized as risk group 2 when the hazard distance
is 1 m (39-3/8") or less. It is categorized as risk group 3 when the hazard distance exceeds 1 m (39-3/8"), and it
will be for professional use instead of consumer use.
In case of risk group 3, there is a possibility of damaging the eyes by direct irradiation when looking into the
projection light from inside the hazard zone even for a moment.
In the case of risk group 2, safe use without damaging the eyes is possible in all circumstances except deliberately
staring into the light projected from the projector.
The combination of the projector and the projection lens which the hazard distance exceeds 1 m (39-3/8") and is
categorized as risk group 3 is as follows.
Model No. Projection lens Model No. Risk group
PT-MZ880
ET-ELT23 Risk group 3 PT-MZ780
PT-MZ680
For Taiwan For other countries and regions
Each dimension inside the hazard zone for combination with projection lens which the hazard distance exceeds
1 m (39-3/8") is as follows.
(Unit: m)
Model No.
Projection lens
Model No.
HD *1 D1 *2 D2 *2 D3 *2 D4 *2
PT-MZ880
ET-ELT23 1.9 0.09 0.09 0.15 0.15 PT-MZ780
PT-MZ680
*1 HD: Hazard Distance
*2 The values of D1 to D4 will change in accordance with the lens shift amount. Each value in the table is the maximum value.