Panasonic PT-MZ880, Руководство по эксплуатации, Страница: 41 / 207

Chapter 2 Getting Started — Removing/attaching the projection lens
ENGLISH - 41
Removing/attaching the projection lens
Removing and attaching methods of the projection lens are same for standard zoom lenses and optional lenses.
Move the lens position to the home position before replacing or removing the projection lens. (
x
page 61)
Attention
f
Do not attach or remove the projection lens while the projector is installed to a ceiling or in a high location.
f
Replace the projection lens after turning off the projector.
f
Do not touch the electric contacts of the projection lens. Dust or dirt may cause poor contact.
f
Do not touch the surface of the projection lens with your bare hands.
f
Do not turn the gear of the projection lens by hand. Doing so may damage the motor.
f
Before attaching the projection lens, remove the lens cover attached to the projection lens.
f
Panasonic takes no responsibility for any damage or malfunction of the product resulting from the use of projection lenses which are not
manufactured by Panasonic. Always use the standard zoom lens supplied with the projector or the specified projection lens.
Note
f
For the adjustment procedure of the focus, zoom, and lens shift after attaching the projector lens, refer to “Adjusting the focus, zoom, and
lens shift” (
x
page 60).
Removing the projection lens
Remove the projection lens using the following procedure.
Lock Unlock
Top slide cover
Lens lock lever
Fig. 1 Fig. 2
Holding position
1) Slide the top slide cover. (Fig. 1)
f
Slide the top slide cover until you can pinch the lens lock lever.
2) While holding the projection lens, pinch the lens lock lever and turn to the UNLOCK side. (Fig. 2)
3) Take out the projection lens straight. (Fig. 2)
Attention
f
Store the removed projection lens where it will be free from vibration and impact.