B
asi
c Op
eration
Remote control operation
E
NGLISH - 26
You can enlarge the projected image down
to a centered area for emphasizing within
the range of 1x to 2x.
Q
Enlarging the image
1. Press
DIGITAL ZOOM +/-
button once.
The centered area of the image will then be enlarged
to 1.5x.
2. Adjust the image size by pressing
DIGITAL ZOOM
+/-
button.
The image size will be changed in steps of 0.1.
Q
Shifting the center point
Press
F
G
I
H
to shift the center point.
You can control the volume of the built-in
speakers and output sound. Press +/- to
control the volume.
Enlarging the centered area
NOTE:
• When the
COMPUTER
signal is projected, the enlargement range will be changed to 1x to 3x. When the
FRAME LOCK
in
POSITION
menu is set to
ON
, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 33.
• When the input signal is changed while the
DIGITAL ZOOM
is activated, the
DIGITAL ZOOM
will be canceled.
Controlling the volume of the speaker
NOTE:
• Power consumption can be reduced if the volume level
is lowered.
• This operation can also be carried out using the
VOLUME
command in the
MAIN MENU
.
See “VOLUME” on page 36.