Panasonic PT-LB51EA Скачать руководство пользователя страница 20

Страница: 20 / 62

NGLISH - 20

asi

c Op

eration

Switching the projector on/off

Connecting

1. Make sure the shape of the power cord plug and the

AC IN

connector on the back

of the projector match, then push the plug all the way in.

2. Connect the

Power cord

to a wall outlet.

Disconnecting

1. Check that the

POWER

indicator of the

POWER

button is lit red, and then unplug the

Power cord

from the

wall outlet.

2. Hold the plug and unplug the

Power cord

from the

AC IN

connector on the back of the projector.

Direct power off function

You can disconnect the

Power cord

during projection or immediately after use and move the projector. The

cooling fan will operate by the internal power supply to cool down the lamp.

When this function is used, it may take more time for the lamp to turn back on again compared to when the lamp cools
down with the

Power cord

connected.

Do not put the projector in a bag while the

POWER

button on the projector is illuminated.

Direct power on function

If you activate the

DIRECT POWER ON

, you can start the projection only with connecting the

Power cord

See “DIRECT POWER ON” on page 35.

Power cord

NOTE:

• Do not use other than a provided

Power cord

• Ensure all the input devices are connected and turned off before connecting the

Power cord

• Do not force the connector as this may damage the projector and/or the

Power cord

• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.

POWER indicator

Indicator status

Status

RED

Lit

The projector is in standby.
When the

LAMP

TEMP

indicator is flashing, the

POWER

indicator will

not be lit.

GREEN

Flashing

The

POWER

is switched on and the projector is getting ready to project.

Lit

The projector is ready to project.

ORANGE

Lit

The

POWER

is switched off and the projector is cooling the lamp.

Flashing

The

POWER

is switched on again when cooling the lamp and recovering

to projection mode. Recovery may take a while.

NOTE:

• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take

a while to start the projection.

• The electric consumption in standby mode is 4 W.

POWER

indicator

Содержание PT-LB51EA































































Результаты поиска

Содержание PT-LB51EA

Отзывы:

Похожие инструкции для PT-LB51EA

Бренды по названию

Популярные бренды

Panasonic PT-LB51EA, Руководство по эксплуатации

Результаты поиска

Содержание PT-LB51EA

Отзывы:

Похожие инструкции для PT-LB51EA

Бренды по названию

Популярные бренды