Basic O
p
eration
Switching the projector on/off
E
NGLISH - 21
1. Plug the
Power cord
into the projector.
The
POWER
indicator lights up in
RED
.
2. Press the
POWER
button.
The
POWER
indicator lights up in
GREEN
after flashing for a while.
The
STARTUP LOGO
is displayed on the screen. See “STARTUP LOGO” on page 34.
1. Press the
POWER
button.
The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any
operation.
To return to the projection, press any button except the
POWER
button.
2. Press the
POWER
button.
The
POWER
indicator lights up in
ORANGE
while cooling the lamp, then illuminates
RED
.
3. Once the
POWER
indicator is lit red, unplug the
Power cord
from the projector.
If you are in a hurry, you can also use the direct power off function while unplugging the
Power cord
from the projector.
(page 20)
Switching on the projector
NOTE:
• Some small rattling or tinkling sound may be heard when starting up, but this is normal and does not affect the
performance of the projector.
• If you disconnected the
Power cord
while on projecting mode, the projection will start with connecting the
Power cord
.
See “DIRECT POWER ON” on page 35.
Switching off the projector
NOTE:
• Press the
POWER
twice or for a long duration to switch the power off.
• You can disconnect the
Power cord
instead of following this procedure. See “DIRECT POWER ON” on page 35.
• You can turn off the projector by pressing the
POWER
button longer than 0.5 seconds.
(2)
POWER button
POWER indicator
(1)(2)
POWER button
POWER indicator
