E
NGLISH - 23
Basic O
p
eration
Remote control operation
You can operate the projector with the
Remote control
within the remote range 15 m (49'2").
Q
Facing to the projector
Ensure the
Remote control emitter
is facing to
the
Remote control signal receptor
on front of
the projector and press the required buttons to
operate.
Q
Facing to the screen
Ensure the
Remote control emitter
is facing to
the screen and press the required buttons to
operate the projector. The signal will be reflected
off the screen. The operating range may differ due
to the screen material. This function may not be
effective with a translucent screen.
You can adjust the setting of the image
position,
DOT CLOCK
and
CLOCK PHASE
automatically for the projected
COMPUTER
signal image.
Operating range
AUTO
SETUP
INPUT
SELECT
COMPUTER WIRELESS
VIDEO
WIRELESS
PRESENTATION
PAGE
MENU
ENTER
FREEZE
SHUTTER
COMPUTER
SEARCH
DEFAULT
INDEX-
WINDOW
MULTI-LIVE
DIGITAL ZOOM
VOLUME
RETURN
NOTE:
• Do not let strong light shine onto the signal receptor.
The
Remote control
may malfunction under strong
light such as fluorescent.
• If there are any obstacles between the
Remote control
and the
Remote control signal receptor
, the
Remote
control
may not operate correctly.
Setting up the image position automatically
NOTE:
•
SIGNAL SEARCH
will be adjusted only when the
SIGNAL SEARCH
is set to
ON
.
• If the dot clock frequency is 100 MHz or higher,
AUTO
SETUP
is not effective.
• If the projected image is dark or blurred around the
edge,
AUTO SETUP
may stop the processing before
complete. Project a much clearer or lighter image and
press the
AUTO SETUP
button again.
• When FUNCTION BUTTON is set to "AUTO SETUP"
(see “FUNCTION BUTTON” on page 34), the AUTO
SETUP operation can also be carried out by pressing
the
FUNCTION
button at the front of the projector.
Screen
Projected image
