About indicator status
90 - ENGLISH
Maintenance
■
■
When there is a problem with internal power
The status of the indicator is displayed with the following symbols.
s
: Off,
●
: On,
H
: Flashing,
■
: On or Flashing
Indicator
Status of the projector
<POWER>
Green
<STANDBY>
Red
<WARNING
TEMP.>
Red
<WARNING
FILTER>
Orange
<SHUTTER>
Blue
<LAMP 1
REPLACE>/
<LAMP 2
REPLACE>
Orange
H
*1
●
H
*1
H
*1
H
*1
H
*1
A problem has been detected within the projector.
The projector will not turn back on even when pressing
the power <POWER ON> button on the remote control
or the power
button on the control panel.
Remove the power plug from the outlet, and plug it
back in again.
If the power turns off, or the indicator turns on or
flashes again, remove the power plug from the outlet
and contact your dealer to request an inspection and
repair. Do not leave the projector plugged in with the
indicator on or flashing. Doing so may cause a fire or
electric shock.
*1: The indicator will flash in approximately 0.5-second intervals.
■
■
When there is a problem with the air filter
The status of the indicator is displayed with the following symbols.
s
: Off,
●
: On,
H
: Flashing,
■
: On or Flashing
Indicator
Status of the projector
<POWER>
Green
<STANDBY>
Red
<WARNING
TEMP.>
Red
<WARNING
FILTER>
Orange
<SHUTTER>
Blue
<LAMP 1
REPLACE>/
<LAMP 2
REPLACE>
Orange
■
*1
■
*1
■
*1
●
■
*1
■
*1
The indicator notifies you when the time set with [Filter
counter timer] (
page 83) has been reached. Replace
the air filter. ( will be shown at the top right of the
screen simultaneously.)
Alternatively, the indicator notifies you when [Filter
counter remaining] becomes 0%. Replace the air
filter. ( will be shown at the top right of the screen
simultaneously.
*2
)
*1: The indicator will turn on or flash under certain conditions, regardless of the status of other indicators.
*2: When [Display] (
page 69) is set to [On], the freeze function (
page 47) or shutter function (
page 47) will not be displayed on
the screen during operation.