Panasonic Palmcorder PV-DV202 Скачать руководство пользователя страница 51

Страница: 51 / 120

Car

d Features

Card Features

M-DEL

M-STOP

You can delete unwanted images and
increase the remaining image memory.

Warning:

Once deleted, images cannot be restored.

DELETE PAGE
Delete specific images from a page.

DELETE ALL
Delete all images. (p. 52)

FORMAT
Delete all data. (p. 53)

M-PLAY

• While deleting image, DO NOT turn off

the Palmcorder or unplug the AC
Adaptor (supplied) because this
will cause irreversible damage to the
memory, resulting in reduced image
storage capacity.

Before you begin

• Set POWER to OFF before inserting a

recorded Memory Card. (pp. 48, 49)

Slide the M-CARD Lock Switch to
unlock, then set POWER to M-CARD.
• “PLAY: PUSH PLAY KEY” is

displayed for 10 seconds.

Press (M-PLAY) to display the Multi
playback screen.
• “PLEASE WAIT” appears on-screen.

Press (M-DEL) to display the
DELETE menu, then rotate and press
JOG KEY to select

PAGE

• DELETE PAGE menu is displayed.

Rotate and press JOG KEY to select
and set the image to be deleted.
• The selected image is underlined in

pink.

Rotate JOG KEY to select

YES

, and

press JOG KEY to delete the selected
image.
• To cancel delete, press (M-STOP)

or rotate and press JOG KEY to
select NO.

• “PLEASE WAIT” appears on-screen

during deletion.

• To delete other images, repeat

steps 4~5.

Delete Specific Images

Warning

POWER

3, 4, 5

JOG KEY

M-CARD
Lock

PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402

Содержание Palmcorder PV-DV202

























































































































Результаты поиска

Содержание Palmcorder PV-DV202

Отзывы:

Похожие инструкции для Palmcorder PV-DV202

Бренды по названию

Популярные бренды

Panasonic Palmcorder PV-DV202, Руководство по эксплуатации

Результаты поиска

Содержание Palmcorder PV-DV202

Отзывы:

Похожие инструкции для Palmcorder PV-DV202

Бренды по названию

Популярные бренды